brace heaight on a 405
Moderator: Excalibur Marketing Dude
brace heaight on a 405
I am a bit unsure on my brace height. All the excaliburs I have seen in the store have clearly visible lines for brace height. I have a very faint line on mine. It actually looks like it may just be the normal spot the string rests. I had to adjust the string today. the bumpers were being rested on. I gave about 4 twist to back it off about .25" It is just behind the mark I mentioned. Is there supposed to be a clearly etched line in the 405s?
Re: brace heaight on a 405
I recommend you set it 3/4" from the Riser/Rail joint , And also should keep the string at least 1/4" off the bumpers at all times .
James : 1 - 19-20 Know this , My beloved Brothers : Let every person be quick to hear , slow to speak , slow to anger , for the anger of man does not produce the righteousness of God .
8ptbuk's Flemish Strings
[email protected]
8ptbuk's Flemish Strings
[email protected]
Re: brace heaight on a 405
Thank you sir. I was a touch shy. I will give it another twist.