help with new bow please
Moderator: Excalibur Marketing Dude
help with new bow please
I wanted to replace the string on my new bow and accidentally placed the stringer aid ABOVE the arrow retention spring. Needless to say, it bent out of shape. So I removed the scope rail from the bow and bent the spring back into shape. The spring is fine now. Problem is, the bow won't cock anymore, when I cock it back, the string bumps against the trigger rather then behind it. Please help. Thanks
Micro_335 - Nikon Bolt XR - 15.5'' Zombies - Killzone 100GR
Matrix G340 - Nikon Bolt XR - Muzzy 100GR
Matrix G340 - Nikon Bolt XR - Muzzy 100GR
Re: help with new bow please
just stick a pencil or something similar in there to trip the trigger claws
http://autumnbreezebrittanys.com
Re: help with new bow please
thanks, but the trigger claws only move approx 2-3mm when I force it with a pencil. not enough to get by the string...
Micro_335 - Nikon Bolt XR - 15.5'' Zombies - Killzone 100GR
Matrix G340 - Nikon Bolt XR - Muzzy 100GR
Matrix G340 - Nikon Bolt XR - Muzzy 100GR
Re: help with new bow please
pull the trigger and push the claws forward like ur shooting it
http://autumnbreezebrittanys.com
Re: help with new bow please
It seems like one of the two screws that holds the retention spring (back screw) controlls the height of the trigger claws. Is this normal? I've since adjusted the back screw and the bow cocks fine now. Strange that only 1 of the 2 retention spring screws actually holds the spring down...
Micro_335 - Nikon Bolt XR - 15.5'' Zombies - Killzone 100GR
Matrix G340 - Nikon Bolt XR - Muzzy 100GR
Matrix G340 - Nikon Bolt XR - Muzzy 100GR
- one shot scott
- Posts: 7023
- Joined: Wed Sep 10, 2008 10:20 pm
- Location: Ontariooh ohh
Re: help with new bow please
are the screws the same length.
are they reversed
are they reversed
*thumbhole vixen*original relayer*y25relayer*matrix380-
Re: help with new bow please
This forum is filled with some smart people, and one shot scott is one of them, I can testify to that!!!one shot scott wrote:are the screws the same length.
are they reversed
Thank you sir!!!
Micro_335 - Nikon Bolt XR - 15.5'' Zombies - Killzone 100GR
Matrix G340 - Nikon Bolt XR - Muzzy 100GR
Matrix G340 - Nikon Bolt XR - Muzzy 100GR
- one shot scott
- Posts: 7023
- Joined: Wed Sep 10, 2008 10:20 pm
- Location: Ontariooh ohh
Re: help with new bow please
I know, cause ive been down that road! lol!
glad to be of some assistance!
glad to be of some assistance!
*thumbhole vixen*original relayer*y25relayer*matrix380-
- DeathMerchant
- Posts: 59
- Joined: Sat Aug 29, 2015 11:09 pm
- Location: Central Coast of Oregon
Re: help with new bow please
These guys that have been around awhile can save a lot of time and frustrated effort and like Scott says most of them have encountered the same problems at one time or another. I've already received some tips and advice that have saved some bacon and I appreciate it.
Matrix 380 Blackout
HHA Optimizer Speed Dial, Air Brakes, DR Kit, TriggerTech SS
Vixen II (Wifes)
Semper Fi
HHA Optimizer Speed Dial, Air Brakes, DR Kit, TriggerTech SS
Vixen II (Wifes)
Semper Fi