S5 string stops

dmini · Post by **dmini** » Wed Oct 21, 2015 8:55 pm

Need some advice from the experts. How far from the string to the S5 stops, I have seen everything from just touching, to a credit cards width. This is on a 2014 Equinox. Thanks,
Al

georgiaboy · Post by **georgiaboy** » Wed Oct 21, 2015 8:59 pm

I keep mine about a credit card width.

BrotherRon · Post by **BrotherRon** » Wed Oct 21, 2015 9:18 pm

I don't know much about the older models, but on my Matrix 330 at 1/4"
On my 310 with the Dr Stirrup db killers I keep 1/16"

Deerstalker · Post by **Deerstalker** » Wed Oct 21, 2015 9:28 pm

On my Equinox I try & keep the gap at about 1/8" to 3/16".

j.krug · Post by **j.krug** » Wed Oct 21, 2015 10:30 pm

georgiaboy wrote:I keep mine about a credit card width.

I'm right there with ya!

L. E. Carroll · Post by **L. E. Carroll** » Thu Oct 22, 2015 2:51 am

My Axiom is about 2 buisness card widths..working well there and not splitting or damaging the bumpers at all.

Gene

dmini · Post by **dmini** » Thu Oct 22, 2015 8:10 am

Thanks everybody.

amythntr · Post by **amythntr** » Thu Oct 22, 2015 1:42 pm

....is it safe to say that there is no perfect answer... Even with the 335... There are those keeping it on the line to those who keep it just behind the line....I guess the important factor is watching your brace height @ 1cc width or 2 or before the line or after it and make sure it stays the same or adjust accordingly.....correct?

Anthony

L. E. Carroll · Post by **L. E. Carroll** » Fri Oct 23, 2015 12:07 am

Anthony,

I think on the wider, older, models the gap can be less, even down to about 1 or 2 business card widths...

On the Matrix and Micro models I think most still go with the recognized 3/16"-1/4" gap as a safe standard... I know both work for me with the appropriate models and I try to keep them very close to those gaps.

Gene

amythntr · Post by **amythntr** » Fri Oct 23, 2015 9:56 am

L. E. Carroll wrote:Anthony,

I think on the wider, older, models the gap can be less, even down to about 1 or 2 business card widths...

On the Matrix and Micro models I think most still go with the recognized 3/16"-1/4" gap as a safe standard... I know both work for me with the appropriate models and I try to keep them very close to those gaps.

Gene

amythntr · Post by **amythntr** » Fri Oct 23, 2015 11:20 am

amythntr wrote:
L. E. Carroll wrote:Anthony,

I think on the wider, older, models the gap can be less, even down to about 1 or 2 business card widths...

On the Matrix and Micro models I think most still go with the recognized 3/16"-1/4" gap as a safe standard... I know both work for me with the appropriate models and I try to keep them very close to those gaps.

Gene

....Gene, I think that is what i was trying to say

Anthony

amythntr · Post by **amythntr** » Fri Oct 23, 2015 11:21 am

....Deleted....

Anthony

Excalibur Crossbow Forum

S5 string stops

S5 string stops

Re: S5 string stops

Re: S5 string stops

Re: S5 string stops

Re: S5 string stops

Re: S5 string stops

Re: S5 string stops

Re: S5 string stops

Re: S5 string stops

Re: S5 string stops

Re: S5 string stops

Re: S5 string stops