quiver

[warningshot]

hate my quiver, i have seen munch mounts and think the would be better than my factory set up, does anyone have other options

[Carnivorous]

My quiver goes in my back pack. I like to keep my bow as light as possible. No quiver or quiver bracket attached to weigh it down and clutter up my bow...

[nyexhunter]

I take mine off when up in tree stand. It's not a bother when walking for short distances. Based on the various crazy things that I saw at the range in many years shooting a vertical bow, I will never have a quiver anywhere in front of the arrow launch point, that 's just me being super cautious. If you want a different type of quiver other than the factory one and feel safe with it then go for it.

[Rufus]

I have mine on top with a single post mount and I also have shortened the quiver so I can get it lower and still see under it through the scope

[paulaboutform]

I use a Danny Miller single post top mount on my M405. Dan sent me extra tapered shoulder washers to mount the post and not scratch my riser. I use it because of my Dr Stirrup kit.

Paul

[nchunterkw]

Been hunting with my Vortex recently and it has S5s, D-Bars and a Munch mount. And it is SUPER front end heavy. I will be making adjustments after season to remove the D-bars and put the stock quiver mount back on. I won't go as far as removing the bracket, but my quiver is only on the bow while walking to my stand then it comes off. If in a tree, I pull up the bow, load it, then drop the quiver back down with the pull rope.

[munch]

most times in a tree stand i take my quiver off . the standard excal quiver is about 61 grams .my ystyle mounts are about 123grams so you add 2oz to the bow . i use a quickie 3 arrow quiver but place 2 arrows in it and the bow is less weight total than a standard set up. if you look at this picture you can see one arrow in the quiver . the one that went threw the moose i think is still flying .thats a 405 custom and i could not find the arrow

[j.krug]

I use a munchmount on my Vortex as well. My quiver is only on the bow when I'm carrying it to and from the stand/blind. Once I'm set up the quiver comes off. I have quiver brackets mounted at all 3 of my tree stands and clip my quiver to the tree beside me or lay it on the ground beside me if I'm hunting from the ground.

[mr meat]

Quiver is only on mine till i get to my spot then its off!

[W.Miguire]

Munch Mount Quiver for me all the way. never gets in the way when you carry your bow no matter how many cloths you have on . easy to remove when you get to your hunting spot. and don't get in your way when you are on the stalk.

[Jeeper]

I use a kwicki 3 arrow qwiver that I shortened up about 3" to work with my micro 15" bolts.. Easy on and off

[warningshot]

mine is loose it make noise, i dont need the bow any front heavier so i will stay away from munch mount, might have to strap it to the pack!!!

[Perforator]

Before I ever saw a Munch mount I saw the need for an alternate to the factory mount.
Turns out my home made one of aluminum does about the same job as a Munch.

[munch]

Before I ever saw a Munch mount I saw the need for an alternate to the factory mount.
Turns out my home made one of aluminum does about the same job as a Munch.

That's a great idea .,I made little rats that mount onto those holes for the site then the munchmount bolts to the ears , adds a little weight but gives the bigger opening to load an arrow . The single post mounts load faster but even my daughter at 14 had no trouble loading her vixen at 3d shoots it's just a kitties practice

[papabear1]

My quiver goes in my back pack. I like to keep my bow as light as possible. No quiver or quiver bracket attached to weigh it down and clutter up my bow...

X2, My quiver is also attached to my day pack, I used the same mount that the quiver slides into and, mounted it the straps of my day pack, I just took a scratch all and heated it to melt holes in the straps and used the same screws to attach the bracket to the straps behind me,,,,, Works Great !!!! Dave