What arrow weight do you prefer?
Moderator: Excalibur Marketing Dude
Re: What arrow weight do you prefer?
After watching some videos on heavy arrows, I decided to build a heavy weight arrow for my Matrix 405. I ended up with 20" Easton XX75 2219 arrows, with a total weight of 711 grains. The bow is noticeably quieter, and is still shooting around 310fps. Can anyone tell me if this would help reduce the chance of limb failure?
Re: What arrow weight do you prefer?
Curious what your set up is. I've gotten tired of broadheads being destroyed on ribs and failure to get pass throughs when hitting bone. Any idea what your speed is? I don't have a chronograph and want to make sure the speed will still work with the speed ring on my scope. It goes down to 250. I've been getting around 300 with 432 grains.
Re: What arrow weight do you prefer?
295fps. Spynal Tapps with 110gr inserts. 125 gr Iron Will broadheads with 50 grain Innerlock adapters.Noreaster wrote: ↑Mon Nov 23, 2020 1:19 pmCurious what your set up is. I've gotten tired of broadheads being destroyed on ribs and failure to get pass throughs when hitting bone. Any idea what your speed is? I don't have a chronograph and want to make sure the speed will still work with the speed ring on my scope. It goes down to 250. I've been getting around 300 with 432 grains.
"Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one."
-Thomas Jefferson
-Thomas Jefferson
Re: What arrow weight do you prefer?
Great, thanks for getting back to me. I'm planning on black eagle executioners with a 92 grain insert and 200 grain grizzlystik Samurai broadheads. I just tested spinal tapps with the 110 and 200 grain field points and they were right at 290. Slow motion video showed some wobble, but I put the offending arrow on a spinner and the field point had some run out. I'll test again tomorrow, but the spine on the spinal taps, zombie slayers and BEE's seem to handle the extra weight up front with no problem. Again, thanks a bunch, Lenny
Re: What arrow weight do you prefer?
janesy wrote: ↑Wed Nov 27, 2019 11:25 amI think you'll find a direct correlation to the weight of the arrows to the bows that have limb problems. And you're seeing that directly![]()
You might consider upping the weight some. A couple years back Excal stopped shipping 150 practise heads and dropped to 100 as people complained they weren't getting the "advertised speed". But the numbers above suggest most people are shooting higher weights than factory
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
Re: What arrow weight do you prefer?
I used 400gr for years, but after reading I will be upping to 450gr minimum.
Micro 335 nightmare
boo string
wheely cheek rest
munch mount
norm arrows
boo string
wheely cheek rest
munch mount
norm arrows
- Lonewolf McQuade
- Posts: 86
- Joined: Mon Jun 29, 2020 7:12 pm
Re: What arrow weight do you prefer?
I only shoot the Excalibur factory arrows with Excalibur's 150gr Boltcutters. Accurate enough to ruin arrows out to 80+ yards & has killed EVERY single animal I've shot at!
My Equinox arrows total 417gr & my Micro 340 arrows total 400gr. Both supply perfection for me, so I'm very pleased with the combination of speed & penetration provided as is. I've never NOT had a pass through
My Equinox arrows total 417gr & my Micro 340 arrows total 400gr. Both supply perfection for me, so I'm very pleased with the combination of speed & penetration provided as is. I've never NOT had a pass through
Re: What arrow weight do you prefer?
Using 2219 XX75 @20” with 1916 Gamegetter insert @18”. Broad head is 200grain Grizzly two blade. Calculated weight is 741 grains. Crossbow is Exocet 200. Hits like a sledgehammer. No more shattered carbon shafts and passes through anything deer or hog so far.
Re: What arrow weight do you prefer?
Just set up some 505 grain Zombie Slayers for the new Wolverine.
Excal Wolverine
Hawke XB-30
Hawke XB-30
Re: What arrow weight do you prefer?
I use black eagle zombie slayers with a 150 gr swacker 3 inch cut broad head. Thay weigh about 436 grains. They leave a hole. Not much of a blood trail so far. None of them, probably 5 have gone no more than 20 yards ![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)