String wear
Moderator: Excalibur Marketing Dude
-
- Posts: 139
- Joined: Sat Mar 05, 2016 4:16 pm
Re: String wear
Thanks Robert for posting. Scotty, looks similar to mine with the separation of serving. I believe you replaced with a custom and problem was solved? I have a vixen string ready to go so if it blows up I'm sur Emile won't mind selling me another lol. I checked the jaws and they seem fine, no rough edges. Some have mentioned polishing, can they be taken out? is that part of the trigger group? the separation on the left is where the rope cocker sits, checked the hooks and they seem fine.does it matter which way the hooks are placed on the string when cocking it?
Re: String wear
Serving separation can be caused by not enough serving tension, strings twisted the wrong way or strings not twisted enough.
What we've seen in the past is strings untwisted to achieve a desired brace height and then shot. What should be done is to shoot the bow and let the string elongate (creep) until the correct brace height is achieved, then more twists added as needed.
The reality is, just like in compound bows, strings and especially cables, should never be untwisted.
What we've seen in the past is strings untwisted to achieve a desired brace height and then shot. What should be done is to shoot the bow and let the string elongate (creep) until the correct brace height is achieved, then more twists added as needed.
The reality is, just like in compound bows, strings and especially cables, should never be untwisted.
Some people just like stepping on rakes
Re: String wear
Sounds to me like he has a factory installed string Boo. It should be twisted correctly if so.
Wildlife Population Control Specialist
Re: String wear
Im with Don..... another pick of the string betond the serving will tell the story
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Re: String wear
True, we are all playing the guessing game right now.robertyb wrote:Sounds to me like he has a factory installed string Boo. It should be twisted correctly if so.
Some people just like stepping on rakes
- nchunterkw
- Posts: 2904
- Joined: Sat Dec 24, 2011 11:21 am
- Location: Wake Forest, NC
- Contact:
Re: String wear
FWIW the stock string that came on my Micro 2 yrs ago separated after 2 shots. When I went to reserve it, it was twisted opposite of how the serving was applied.
Keith
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: String wear
I bet it is where the string is held by the claw as I call it and it is catching it when it is fired as it lifts up away from the string . Had that happen years ago with my Exomax it would cut my string apart. Got it fixed by Danny Miller then no problem .
-
- Posts: 139
- Joined: Sat Mar 05, 2016 4:16 pm
Re: String wear
The string came on the prod and was never touched, bolted it on and shot. It's factory all the way, I sent a couple more pics of the string so they should be up shortly.
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: String wear
Instead of getting many replies as to why some may be correct others may not be . Contact Excalibur customer service .
-
- Posts: 139
- Joined: Sat Mar 05, 2016 4:16 pm
Re: String wear
I sent an email to Peter and have yet to hear back. Might have to call.
Re: String wear
He sent me three more pictures but I can't get them to transfer to my computer from the e-mail. Must be his I-phone picture program. Can't post what I can't get on photobucket.
They looked to me to be twisted correctly though.
They looked to me to be twisted correctly though.
Wildlife Population Control Specialist
-
- Posts: 139
- Joined: Sat Mar 05, 2016 4:16 pm
Re: String wear
Thanks for trying Robert appreciate it. I have email and VM in with excal so we'll see what they can do.
Re: String wear
WAIT...one finally came across I think...maybe the others will too. Click it to expand.
Wildlife Population Control Specialist
Re: String wear
Danny doesn't make the Cub string. The string certainly is twisted properly.
I can't expand it on my side. , does it look like .035" Angel Majesty? I almost see the some twisted serving rather then the woven Angel Majesty.
I can't expand it on my side. , does it look like .035" Angel Majesty? I almost see the some twisted serving rather then the woven Angel Majesty.
Some people just like stepping on rakes
- nchunterkw
- Posts: 2904
- Joined: Sat Dec 24, 2011 11:21 am
- Location: Wake Forest, NC
- Contact:
Re: String wear
I agree Boo. Doesn't look like AM 035 to me.
Keith
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><