C2 crank cocker to adjust brace height?
Moderator: Excalibur Marketing Dude
-
- Posts: 373
- Joined: Sat Mar 19, 2016 4:51 pm
- Location: China Spring, Tx
C2 crank cocker to adjust brace height?
Hey guys, just received my matrix 350 LE. Brace height is very low. Can I use the C2 crank cocker in conjunction with the heavy duty stringing aid to adjust brace height? If so would someone explain the procedure and especially the release part.Also advice on twisting the string (how many twist per half inch and direction). Thanks in advance for any help.
Matrix 350 LE 18 in. Diablos 150 gr. Boltcutters Zombie Slayers 150 gr. Slick Tricks C2 crank Hawkke XB 30 Pro SR
Re: C2 crank cocker to adjust brace height?
Arrowflinger wrote:Hey guys, just received my matrix 350 LE. Brace height is very low. Can I use the C2 crank cocker in conjunction with the heavy duty stringing aid to adjust brace height? If so would someone explain the procedure and especially the release part.Also advice on twisting the string (how many twist per half inch and direction). Thanks in advance for any help.
I use mine. Put the string aid on and run the hooks from the C2 down and hook to the stringing aid. Engage the C2 and crank it up and adjust the string. I hold my handle tightly and flip off the crank release and pull the trigger with other hand and slowly crank it down. One full twist of string will move about 1/8 inch.
Wildlife Population Control Specialist
Re: C2 crank cocker to adjust brace height?
this how I did mine before a friend set me up with a pressrobertyb wrote:Arrowflinger wrote:Hey guys, just received my matrix 350 LE. Brace height is very low. Can I use the C2 crank cocker in conjunction with the heavy duty stringing aid to adjust brace height? If so would someone explain the procedure and especially the release part.Also advice on twisting the string (how many twist per half inch and direction). Thanks in advance for any help.
I use mine. Put the string aid on and run the hooks from the C2 down and hook to the stringing aid. Engage the C2 and crank it up and adjust the string. I hold my handle tightly and flip off the crank release and pull the trigger with other hand and slowly crank it down. One full twist of string will move about 1/8 inch.
IN GOD WE TRUST
Jeff
animals are killed, crops are harvested
matrix 355
matrix 330
BE executioners and zombies, w/110 brass
100gr spitfire maxx
Boo strings
excaliber strings
Dagriz knife
Jeff
animals are killed, crops are harvested
matrix 355
matrix 330
BE executioners and zombies, w/110 brass
100gr spitfire maxx
Boo strings
excaliber strings
Dagriz knife
Re: C2 crank cocker to adjust brace height?
To answer your other question,Arrowflinger wrote:Hey guys, just received my matrix 350 LE. Brace height is very low. Can I use the C2 crank cocker in conjunction with the heavy duty stringing aid to adjust brace height? If so would someone explain the procedure and especially the release part.Also advice on twisting the string (how many twist per half inch and direction). Thanks in advance for any help.
twist your string counter clockwise.
Dave
2010 equinox,
known as doe bow
vixenmaster custom string
swacker bhs, 2/1/4" cut 120 grn.
xx75 Easton 2219,s
firebolt arrows
S5 pads
if it ain't broke don't fix it
be safe in all you do
see ya in the woods
<-------<
known as doe bow
vixenmaster custom string
swacker bhs, 2/1/4" cut 120 grn.
xx75 Easton 2219,s
firebolt arrows
S5 pads
if it ain't broke don't fix it
be safe in all you do
see ya in the woods
<-------<
-
- Posts: 373
- Joined: Sat Mar 19, 2016 4:51 pm
- Location: China Spring, Tx
Re: C2 crank cocker to adjust brace height?
Thanks for the info Robert , Dave,&Jeff. Just out of curiosity when you at hold on to the handle tight please enlighten me on the force involved; realizing I'm sure it's gonna act as a knucklebuster and not wanting to be another crossbow accident statistic. Thanks for your time and patience.
Matrix 350 LE 18 in. Diablos 150 gr. Boltcutters Zombie Slayers 150 gr. Slick Tricks C2 crank Hawkke XB 30 Pro SR
Re: C2 crank cocker to adjust brace height?
Arrowflinger wrote:Thanks for the info Robert , Dave,&Jeff. Just out of curiosity when you at hold on to the handle tight please enlighten me on the force involved; realizing I'm sure it's gonna act as a knucklebuster and not wanting to be another crossbow accident statistic. Thanks for your time and patience.
I am 66 years old and had open heart surgery not too long ago. I assure you it is not hard. Just said hold on tight cause some people do not seem to be able to hold a few lbs. of pressure when holding on to a handle. It is like decocking your bow. Scary till you actually do it.
Wildlife Population Control Specialist
Re: C2 crank cocker to adjust brace height?
When adjusting brace height, I have the clicker/anti-backlash engaged and only crank enough to adjust string. That way I don't have to worry about the trigger or ADF when unloading the stringer.
Czy_Horse
Czy_Horse
Re: C2 crank cocker to adjust brace height?
X2Czy_Horse wrote:When adjusting brace height, I have the clicker/anti-backlash engaged and only crank enough to adjust string. That way I don't have to worry about the trigger or ADF when unloading the stringer.
Czy_Horse
Matrix 350 LE, Hawke XB 30 Pro SR,Trigger Tech, ADF,Danny Miller bumpers, Leupold Vendetta 2 rangefinder
Tactacam
18" Spynal Tapps,110 gr inserts, 100gr Sevr
Lumenoks
vixenmaster Force 10 string,
Charger EXT crank
Tactacam
18" Spynal Tapps,110 gr inserts, 100gr Sevr
Lumenoks
vixenmaster Force 10 string,
Charger EXT crank
Re: C2 crank cocker to adjust brace height?
there is not a lot of force, have a good grip on the handle and do not let it slip. take your time and don't try to rushArrowflinger wrote:Thanks for the info Robert , Dave,&Jeff. Just out of curiosity when you at hold on to the handle tight please enlighten me on the force involved; realizing I'm sure it's gonna act as a knucklebuster and not wanting to be another crossbow accident statistic. Thanks for your time and patience.
IN GOD WE TRUST
Jeff
animals are killed, crops are harvested
matrix 355
matrix 330
BE executioners and zombies, w/110 brass
100gr spitfire maxx
Boo strings
excaliber strings
Dagriz knife
Jeff
animals are killed, crops are harvested
matrix 355
matrix 330
BE executioners and zombies, w/110 brass
100gr spitfire maxx
Boo strings
excaliber strings
Dagriz knife
-
- Posts: 373
- Joined: Sat Mar 19, 2016 4:51 pm
- Location: China Spring, Tx
Re: C2 crank cocker to adjust brace height?
Thanks so much for the info guys. Heeded yall's advice and got the ol 350 up and shooting. Shot her a few times this evening now can't wait for a little range time .
Matrix 350 LE 18 in. Diablos 150 gr. Boltcutters Zombie Slayers 150 gr. Slick Tricks C2 crank Hawkke XB 30 Pro SR