matrix limbs on the Micro 355, possible?

Dominic · Post by **Dominic** » Mon May 23, 2016 3:01 am

Hi guys,
just want to ask if somebody tried out to put matrix limbs on a micro355. I had an limb issue in april after 200 shots. Fired it with 400grain. Never dry fired it or anything else. Just happend while i cocked the bow. Perhaps the matrix limbs works better but it will also make the crossbow slower. Does anybody know how much fps it will it be slower with matrix limbs? Or is it possible to order only a riser from a micro315? I really love my micro but the limb issue with it makes me headache.

Normous · Post by **Normous** » Mon May 23, 2016 7:44 am

Es tut mir leid. Das is nicht moglich.

vixenmaster · Post by **vixenmaster** » Mon May 23, 2016 7:52 am

I spect you would lose 45 fps goin to the Matrix limbs. 315 Riser is same as the 335 n 355 Risers

foofoo · Post by **foofoo** » Mon May 23, 2016 3:58 pm

I'm so sorry. This is not possible

Dominic · Post by **Dominic** » Mon May 23, 2016 4:07 pm

Thanks for the answers. Is there a other way to take the stress out of the limbs? My string is 1cm away from the REDS, that is about 2/5 inch.
Greets from germany!

wildcatter · Post by **wildcatter** » Mon May 23, 2016 4:56 pm

foofoo wrote:I'm so sorry. This is not possible

REALY?????
https://www.youtube.com/watch?v=HhaeFWVmCCA

Normous · Post by **Normous** » Mon May 23, 2016 5:10 pm

Interesting, do you know if the riser pockets require machining to fit the Matrix limbs?

wildcatter · Post by **wildcatter** » Mon May 23, 2016 8:33 pm

No but it is a bitch getting the string on. I was just simply doing it to see if they would attach, once they did, it drew back so stupid easy I knew I would have to aim higher, But to my surprise that 30 yard guess for my aiming point was dead nuts. I was aiming for the eyeball on the elk and it was dead on.

I am not saying I would even consider using the micro with Matrix limbs, but you can see from this it is awfully hard to make any recurve inaccurate,,, they just shoot anything. I have changed limbs between my 330 and my 380, and both bows remained dead on and shot within 5 fps of what they did before the swap, I have changed strings from 3 different makers and 2 different materials,,, same thing dead on from where they were before the change.

But I posted this because "I don't know" should have been the response instead of "this is not possible" its posts like this leaves doubt about people having problems they swear they didn't cause!

Normous · Post by **Normous** » Mon May 23, 2016 8:41 pm

Thank-you for the explanation and I now stand corrected.
I thought the Matrix limbs would not fit into the riser cutout. First I should have used out my calipers to check the dimension limb and pocket dimensions before posting.

wildcatter · Post by **wildcatter** » Mon May 23, 2016 10:22 pm

OK Norm,,, what did you post?? it was the only post I can't decipher,,,

foofoo · Post by **foofoo** » Tue May 24, 2016 3:59 pm

Wildcatter i posted the translation for everyone.Es tut mir leid.Das is nicht moglich. means/ I'm so sorry. This is not possible

while hunting if my limbs crapped out at this point id probably just go home

rather than to frankenbow things.

Dominic · Post by **Dominic** » Tue May 24, 2016 4:13 pm

At the first moment i was confused to get a answer in german.
Thank you (Danke schön)

wildcatter · Post by **wildcatter** » Tue May 24, 2016 5:48 pm

foofoo wrote:Wildcatter i posted the translation for everyone.Es tut mir leid.Das is nicht moglich. means/ I'm so sorry. This is not possible while hunting if my limbs crapped out at this point id probably just go home rather than to frankenbow things.

Ah I see, like I said this was just a what does it take to make these bows not hit what you aim at moment, just had to see what would happen,, as stated I would not run matrix limbs on a Micro, but you can do it, wonder of it would void the warranty,,,,

But seriously I would have the 380 Mad Max or the custom 350W as a backup if I was on a hunt I would have to worry about such a thing,,,,,

I'm sick of buying backup limbs, as all that has done so far is after watching them just set there unused end up building a bow like I did the 350 because I can't stand having them for nothing,,,,, they just end up costing me too much to have around,,,,,

foofoo · Post by **foofoo** » Wed May 25, 2016 6:43 am

racking up points · Post by **racking up points** » Wed May 25, 2016 8:16 am

foofoo wrote:auto re-set has been covered in topics before do a search. it is a condition that happens on some trigger techs. i sent mine back for adjustment. something with the return spring i believe. it can cause you to have to let your string down on the ADF latches. if your latches are rough especially with a 405 it will beat up a serving.cocking a 405 the little distance from the ADF to the trigger latch is quite a task.

FooFoo is right, I had a defective one too. I got a new one on replacement. But I must've been doing something wrong

Excalibur Crossbow Forum

matrix limbs on the Micro 355, possible?

matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?

Re: matrix limbs on the Micro 355, possible?