Gen II Limbs

trwilson · Post by **trwilson** » Wed Jul 20, 2016 8:09 pm

Question?

I heard it stated that Excalibur developed new Gen. II limbs to address limb de lamination issues? Is it a true statement that all micro bows comes equipped with Gen II limbs?

Is the Bulldog 400 equipped with Gen II limbs, as well?

Normous · Post by **Normous** » Wed Jul 20, 2016 8:23 pm

Yes, yes and yes. Buy now in confidence.

newbie · Post by **newbie** » Wed Jul 20, 2016 8:29 pm

Yep. What Norm said.

Doe Master · Post by **Doe Master** » Wed Jul 20, 2016 8:59 pm

I have what some would call first generation Micro limbs . No problems for me .

Buy with confidence .
Because at Excalibur they stand behind their product . Far safer than standing infront .

vixenmaster · Post by **vixenmaster** » Wed Jul 20, 2016 10:36 pm

I have the 1st Gen. Micro 335 Nightmare has over 1200 shots on it n same limbs it came wid!

flightattendant100 · Post by **flightattendant100** » Thu Jul 21, 2016 6:46 am

Doe Master wrote:I have what some would call first generation Micro limbs . No problems for me .
Buy with confidence .
Because at Excalibur they stand behind their product . Far safer than standing infront .

SEW · Post by **SEW** » Thu Jul 21, 2016 6:43 pm

Is there an actual difference in the limbs ?

newbie · Post by **newbie** » Thu Jul 21, 2016 7:00 pm

limbs are finished in house now.... otherwise the same.
They also have markings on the back for date/ lot/ tracking purposes... stamped right into the limb material.

robertyb · Post by **robertyb** » Fri Jul 22, 2016 8:41 am

newbie wrote:limbs are finished in house now.... otherwise the same.
They also have markings on the back for date/ lot/ tracking purposes... stamped right into the limb material.

I thought that was the deflection number. It used to be from about 95 to 108 or so until they changed the way they measured deflection.

nenokid · Post by **nenokid** » Mon Jul 25, 2016 2:35 am

I have Micro 335 (2015),1° delamination at 30 shot, with new limbs 850 shot new delamination. Attention to buy

sproulman · Post by **sproulman** » Mon Jul 25, 2016 8:56 am

nenokid wrote:I have Micro 335 (2015),1° delamination at 30 shot, with new limbs 850 shot new delamination. Attention to buy

Any chance of picture of this..Thanks...

nenokid · Post by **nenokid** » Tue Jul 26, 2016 2:17 am

I am trying to post photos of breaking limbs, but this is the answer with 26kb pictures ..... "Sorry, the board attachment quota has Been reached."

DavideSpeed · Post by **DavideSpeed** » Tue Jul 26, 2016 3:25 am

robertyb · Post by **robertyb** » Tue Jul 26, 2016 8:17 am

nenokid wrote:I am trying to post photos of breaking limbs, but this is the answer with 26kb pictures ..... "Sorry, the board attachment quota has Been reached."

Use photobucket to post pictures.

nenokid · Post by **nenokid** » Tue Jul 26, 2016 9:10 am

This is first broken limb at 30 shoot in 2015:

this now at 850 shoot:

I use only Quill 400 grain, re-tightened with locktite on the screws, brace OK, flamish string and air brake.
What do you think about it?

Excalibur Crossbow Forum

Gen II Limbs

Gen II Limbs

Re: Gen II Limbs

Re: Gen II Limbs

Re: Gen II Limbs

Re: Gen II Limbs

Re: Gen II Limbs

Re: Gen II Limbs

Re: Gen II Limbs

Re: Gen II Limbs

Re: Gen II Limbs

Re: Gen II Limbs

Re: Gen II Limbs

Re: Gen II Limbs

Re: Gen II Limbs

Re: Gen II Limbs