Looking at the riser on my exocet 165 there is the recessed pocket similar to an overdrawn, could i use a shorter bolt with a fixed blade broadhead providing i keep with the recommended bolt weight?
With a 20 inch bolt with field point is nearly the length of stirrup, just seems to be a lot of exposed bolt and broadhead?........curious.
Using a shorter bolt question
Moderator: Excalibur Marketing Dude
- ageless mind
- Posts: 23
- Joined: Sat Aug 02, 2014 7:47 pm
- Location: Memphis, Mi
Re: Using a shorter bolt question
You can easily shorten that arrow till the fixed broadhead sits in the riser cutout.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
- GrassyKnoll
- Posts: 1421
- Joined: Sun Dec 12, 2010 9:13 am
- Location: Jackson, NJ
Re: Using a shorter bolt question
I shoot 16 3/16" zombies out of both of my 380's.. The back of the broadhead just sits inside of the front of the channel... No accuracy problems...
Matrix 380 Xtra with Vortex Viper XBR, Trigger Tech,
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
- Spike Country
- Posts: 250
- Joined: Tue May 01, 2012 9:28 pm
- Location: Swamps of Michigan
Re: Using a shorter bolt question
I have some 18 inch laser II set up for my newly acquired exocet 165. The rail on the 165 is actually 1/8 shorter than a bulldog rail by my measurements.
MICHIGAN MEAT HUNTER "Shooting Tomorrows Trophies Today"
Proud member of the Michigan Crossbow Federation!
Proud member of the Michigan Crossbow Federation!