New to crossbows new member
Moderator: Excalibur Marketing Dude
New to crossbows new member
I just received my micro 335 and need a little advise on mechanical broadheads.I will be using the 250 gr quills but want to use either 100 0r 125 gr broadhead.Can I switch out to a heavier insert? If so what insert gr. do I need for 100gr and 125gr.I contacted cs and was told I could use 100gr but dont go below 350 total weight.
MIcro 335 GEN 2
Widow Maker/ Undertaker
Nchunterkw Strings
Vixenmaster Slave Stringer
Cabelas Laser Stricker 11 Broadheads
Widow Maker/ Undertaker
Nchunterkw Strings
Vixenmaster Slave Stringer
Cabelas Laser Stricker 11 Broadheads
Re: New to crossbows new member
With 100 grain heads you'll be around 360 grains total if memory serves me right, I would just go with 125 grain heads, and get ready to hunt. You'll need 125 field points to practice with though.
It’s not the way you rock, it’s the way that you roll!
Re: New to crossbows new member
ok thanks
MIcro 335 GEN 2
Widow Maker/ Undertaker
Nchunterkw Strings
Vixenmaster Slave Stringer
Cabelas Laser Stricker 11 Broadheads
Widow Maker/ Undertaker
Nchunterkw Strings
Vixenmaster Slave Stringer
Cabelas Laser Stricker 11 Broadheads
Re: New to crossbows new member
Some use125 gr heads to bring Quills to about 380 grs .
Some put in 110 gr brass inserts with 100 gr heads ...
fun playing around with things but if you do not replace inserts i would go with 125 head and little easier on your limbs ....But what do i know...
Some put in 110 gr brass inserts with 100 gr heads ...
fun playing around with things but if you do not replace inserts i would go with 125 head and little easier on your limbs ....But what do i know...