Replacement Scope Ring Screws

[amythntr]

....anybody know where to get replacement scope ring screws? I have Crossbones Scopes on my CB's....can these be purchased in titanium? What are the size of these screws?

Thanks,

Anthony

[Buszone]

Anthony , Check Brownell's or Midway USA. I purchased a kit a couple years back from Brownell that had scope mount replacement screws for 99% of was out there.

[amythntr]

Anthony , Check Brownell's or Midway USA. I purchased a kit a couple years back from Brownell that had scope mount replacement screws for 99% of was out there.

....Right on Buszone....perfect....now if I knew the size

Anthony

[racking up points]

-I doubt you can get a screw that small in titanium.
-Which ring are you using? It might help someone to give you the correct size.

Good luck

[amythntr]

-I doubt you can get a screw that small in titanium.
-Which ring are you using? It might help someone to give you the correct size.

Good luck

1" rings gotten from Dr.Danny Miller for Thompson I believe...Thanks Derrick


Anthony

[foofoo]

are these Excalibur rings? scope ring screws are usually an odd duck size. a 6-48 mostly or 8-40 thread in quite a few different lengths. i have purchased replacement screw kits from Leupold and brownell . the brownell kit i purchased use low quality metal. the Leupold screws are top notch.if you have a Crossbones scope i would pick up a set of medium height Leupold PRW-S rings. i doubt youd ever have a screw issue but if you do Leupold would send a replacement or 2 .Warne rings are very good quality also. i lost a windage screw once and they sent a replacement in a few days.

[amythntr]

are these Excalibur rings? scope ring screws are usually an odd duck size. a 6-48 mostly or 8-40 thread in quite a few different lengths. i have purchased replacement screw kits from Leupold and brownell . the brownell kit i purchased use low quality metal. the Leupold screws are top notch.if you have a Crossbones scope i would pick up a set of medium height Leupold PRW-S rings. i doubt youd ever have a screw issue but if you do Leupold would send a replacement or 2 .Warne rings are very good quality also. i lost a windage screw once and they sent a replacement in a few days.

....i bought the Thompson Center rings from Dr. Danny Miller....one would think I should have picked up Leupold Rings to go with the scope....dah! foofoo on me!

Anthony

[foofoo]

some of the Thompson Center rings are actually made by Warne. are they steel? if they are Aluminum just call Thompson Center. they are part of Smith Wesson but there customer service is still pretty good to replace things. .

[amythntr]

some of the Thompson Center rings are actually made by Warne. are they steel? if they are Aluminum just call Thompson Center. they are part of Smith Wesson but there customer service is still pretty good to replace things. .

..... Excellent idea foof.....that is what I love about this forum!

Anthony

[8ptbuk]

I may be wrong but I think I got Tradition rings from Danny ....

[foofoo]

ive bought parts direct from Traditions also. they have a wonderful cust service also. i believe the Traditions rings are same or very similar to Leupold rifleman rings.

[Big Pard]

I am a firm believer in steel rings and bases. Warne/TC are made of steel and come with Torx head screws which seldom strip.

[amythntr]

I may be wrong but I think I got Tradition rings from Danny ....

....Tradition!...you are correct 8ptbuk....Thompson stuck in my mind but they were Tradition..thanks!

Anthony

[amythntr]

I may be wrong but I think I got Tradition rings from Danny ....

.....called Traditions....they are useless...had to wait 15 minutes on hold only to be told they have no spare parts for scopes....

Anthony

[8ptbuk]

I may be wrong but I think I got Tradition rings from Danny ....

.....called Traditions....they are useless...had to wait 15 minutes on hold only to be told they have no spare parts for scopes....

Anthony

Either 6-48 or 8-40 , Call Danny Miller and ask him .