Arrow and Bow combinations of forum members

[longbow joe]

[url=https://postimg.cc/XBM5KFR3]
These deer cant tell that your crossbow can pass thru 3 or 4 of them you only need one pass thru and the vixen will do just that! No cranking winch is required either ...my 100 lb daughter can cock a vixen

[2019 Bulldog 440]

I shoot a 250GN 18” Proflight bolt with 100GN heads/field-points with my Matrix Bulldog 440 and my MAG 340 in Kryptec Raid Camo with all the silencing gear less the ex-shox.

[Assassin1]

ASSASSIN 400TD
TACT ZONE 100
MICRO SUPPRESSOR 355
HAWKE XB30
16.5 INCH DRAGON SLAYER
110 GRAIN BRASS INSERTS
100 GRAIN SLICK TRICKS

[aporter]

Still OLD SCHOOL:
Eclipse XT
20" Firebolts from Danny Miller
125 Grain NAP SpitFires, (Old stock)
NO illuminated nocks. My old eyes can still allow me to "savor" the shot when I pull the trigger and watch the Firebolt head for it's intended target. Dinner down. Yum - Yum

[Colorado Crossbow]

Excalibur Assassin 400TD w/ factory standard string
Tack 100 scope
22" XX75 Orange Shafts w/ Regular aluminum inserts
4" feather fletching
150 grain field point or 150 grain Excalibur Boltcutter
Total arrow weight 500 grains

[sportsman70003]

Excal 400 Td
Dragon Claw 16"
110 gr. insert
100gr. Ravntek Broadheads
2" Blazers
25 gr. screw on weight
75 gr. steel Innerloc weight adapter.
Rhino nocks
495 gr Total weight

[wheelsquad]

Bulldog 417 shooting 20" ZS shafts, 92gr inserts, Lumenoks, and Sevr 125gr, for 455gr total. Took 3 deer with this combo last fall, 35, 52, and 30 yds. All were clean pass through, including the biggest buck of my life with the arrow zipping through one elbow joint.

Micro 327 Short, shooting 16.5" Wyvern Dragon Claws (BEE shaft with 110gr insert), Lumenok, and 100gr Sevr for about 410gr total. Took 1 deer with this combo last fall, 12 yds facing nearly dead on. Sevr 1.5 entered base of the neck and exited just forward of the hip.

[Rokon92]

Ready for the opening day in Georgia Sept. 10th. Replaced my Axiom with a Mag340 and will be going bone stock Excalibur products starring 250 gr. Quill bolts and 150 gr. Bolt Cutters.wish me luck. I have a nice buck on camera pretty consistently and does a plenty. Would like to fill the freezer early. Will report back later next week.

[xcaliber]

Ready for the opening day in Georgia Sept. 10th. Replaced my Axiom with a Mag340 and will be going bone stock Excalibur products starring 250 gr. Quill bolts and 150 gr. Bolt Cutters.wish me luck. I have a nice buck on camera pretty consistently and does a plenty. Would like to fill the freezer early. Will report back later next week.

Good luck, but these posts are better seen on the Hunting Forum. You can start a whole new topic there.

[Rokon92]

I was just sharing my arrow and bow combination. Sorry I got long winded.

[N5JIF]

My Axiom with a Boo string and cat whiskers and a leuipold Pig plex reticle. With the fire bolt arrows and Montec M3 125 gr heads make a total weight of 380. I sighted it in at 25 yds on the cross hairs. This makes the ring above the crosshairs dead on at 20 yds, and the ring below on at 30. The hash marks below the bottom ring are on at 32 and 34 yards. The top of the post is on at 36. Works perfect for any shot i'm willing to take.

[adzsask]

Finally retiring my 150 grain boltcutters, 170 grain NAP F.O.C. crossbow broadheads, still one more season on the quills then onto some executioners. Probably never changing my bow I love my 335 nightmare.

[Valleywalker]

First time poster, long time lurker.

I picked up a Bulldog 305 (limited run from Excalibur) a few weeks ago and am loving it.

I’m shooting the stock Quills with 100gr field points for a total of 350gr weight. I also shot it with 150gr points as well and found better accuracy to 30yards with the lighter arrows.
I have a few weeks of archery whitetail season left and am running 100gr x-act Broadheads for now, plan to keep my shots under 30y as I know it’s dialled nicely within that range.

I also have an Axiom SMF and have always shot 150gr points and 150gr bolt cutters through it with the stock fire bolts.

Previously I owned a Mag340 as well. Always shot stock quills with 150gr points/150gr boltcutters in that one.

[Shalako]

Well I’m the new kid at school and I just got my first excal a couple of months ago, but fwiw-
Mag 340 I bought on another forum, it came with 2 quills and 2 bees ( haven’t shot the bees yet, I plan to remedy that today). I bought a dozen switchblade arrows built by SCCA (302gr) and so far this is a killer combo. I’m impressed with these arrows, I’m looking forward to stretching them on out and finding out how they work with broadheads.