Permanent loctite
Moderator: Excalibur Marketing Dude
Permanent loctite
Can anyone please help me with this dilemma,I put permanent loctite on the 2 bolts that hold bow to frame I want to use dr stirrup but if I can't bolt out I won't be able to any HELP would greatly be appreciated
A stupid question is a question never asked
Re: Permanent loctite
Permanent as in RED?
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: Permanent loctite
You'll need to get heat to the loctite. Stick in an allen key into the fastener and heat until red. Remove the key soon after it's no longer red and us your T handle.
Some people just like stepping on rakes
Re: Permanent loctite
That's exactly what I was going to say, should come out no problem
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: Permanent loctite
Thanks don I was thinking heat but not sure how to go about it Thank you for reply
A stupid question is a question never asked
Re: Permanent loctite
You don't need to heat until the part is red in color. Permanent Loctite breaks loose at approx. 425 degrees Fahrenheit.
Micro 335
Matrix 380
Boofest 2016 Matrix 330
Trigger Techs all around
125 gr. QAD Exodus (Micro) 100 gr Slicks otherwise
Strings by Vixenmaster
Arrows by Xcaliber
Matrix 380
Boofest 2016 Matrix 330
Trigger Techs all around
125 gr. QAD Exodus (Micro) 100 gr Slicks otherwise
Strings by Vixenmaster
Arrows by Xcaliber
Re: Permanent loctite
Careful, don't melt/distort your stock, I know one guy who did trying to heat up the accidently used permanent Loc tite at the stock to mainframe screw.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Re: Permanent loctite
Michael, we're talking about the mainframe to riser bolts right?
Some people just like stepping on rakes
Re: Permanent loctite
I remember having to use generous acetylene to melt the permanent Loc tite used on an engine pulley.Eck wrote:. Permanent Loctite breaks loose at approx. 425 degrees Fahrenheit.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Re: Permanent loctite
Just to clarify, I meant to heat the allen key.
Some people just like stepping on rakes
Re: Permanent loctite
Sounds like the riser to mainframe screws and not the stock to mainframe.youngguns wrote:I put permanent loctite on the 2 bolts that hold bow to frame
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Re: Permanent loctite
Don you are correct mainframe to riser bolt I did what you said came right out THANKS DON
A stupid question is a question never asked
Re: Permanent loctite
Now you know why i use only fingernail polish...52 years at gun shop heard it all....