brace height bull dog

[bhayward]

can someone post a picture of properly set brace height. and how far from the reds the string should be.

[GrassyKnoll]

I've read on here where Peter from Excalibur says 2" from the rail/riser connection will give you the fastest speed from the Bulldog..

You definitely want enough brace height to where the string is not sitting or pushing into the REDS... Most I believe prefer about an 1/8" - 1/4" off the bumpers..

[SEW]

Peter is correct. I've tested above, at and below.

[amythntr]

Excellent Thread....I am reposting into the arrow and bow combination for people who might ask the question later!

Anthony