Micro Suppressor

[SEW]

The BD400, all the Matrix lineup from 380 down, Micros, and the BD380 and Bullpups. But after this year? That list on the left (after tapping Excalibur Xbows )is really long. Will they have the BD380 and M380 year after year? That's a lot of models currently.

[Boo]

We are not the normal Excal purchasers.

That is so true Steve. The norm just isn't nearly as well educated as us (the whole forum). Nor are they as particular as us.

[Czy_Horse]

Stopped by my local shop Sat. morning and found the Suppressor and the new 380 Bulldog !

" Doe Master wrote:
I am not going to say how many I have . But I am a member of the Excalibur addiction anonymous club .
" Hi my name is ______ and I feel this urge to caress my bow at all hours . " "

I managed to touch it, shoot it and quickly leave with out a Suppressor or a hole in my Visa .

[Patcon]

Impressions of the new bows?

[amythntr]

....wondering why the "suppressor" stuff is not on the new 380?

Anthony

[Minnow]

....wondering why the "suppressor" stuff is not on the new 380?

Anthony

I have a feeling it's because then the micro suppressor wouldn't be the quietest xbow on the market

[amythntr]

....wondering why the "suppressor" stuff is not on the new 380?

Anthony

I have a feeling it's because then the micro suppressor wouldn't be the quietest xbow on the market

....well, I know that...but isn't this heading to all the bows having all the quieting stuff on it...or is there going to be some with some without?

Anthony

[newbie]

i doubt its heading that way Anthony...
.... rather all to the bullpup design.

[racking up points]

i doubt its heading that way Anthony...
.... rather all to the bullpup design.

From what I see in pictures, mind you, there is no way to bullpup a Micro 335 or 315 because the riser bolt would sit in the stock; those mainframes are too short to be bullpupped. With the Micro 355 mainframe, the riser-mainframe bolt is very close to the end of the stock.

[newbie]

thanks Derrick for pointing that out. i knew before you couldnt do a 315 but was unaure of the 335. Anthony was referring to the matrix 380 though as was I.
I dont see them adding all that crap to all they bows i have a feeling it will be a test to see how it sella then maybe offer more bows. The bullpup i can see going on all the matrix line.

[Czy_Horse]

Stopped by my local shop Sat. morning and found the Suppressor and the new 380 Bulldog !

" Doe Master wrote:
I am not going to say how many I have . But I am a member of the Excalibur addiction anonymous club .
" Hi my name is ______ and I feel this urge to caress my bow at all hours . " "

I managed to touch it, shoot it and quickly leave with out a Suppressor or a hole in my Visa .

Well my addiction won . . . I traded in my Micro 335 for the new Micro 335 Suppressor .

[Patcon]

Have you shot it yet? What are your early impressions?

[flightattendant100]

thanks Derrick for pointing that out. i knew before you couldnt do a 315 but was unaure of the 335. Anthony was referring to the matrix 380 though as was I.
I dont see them adding all that crap to all they bows i have a feeling it will be a test to see how it sella then maybe offer more bows. The bullpup i can see going on all the matrix line.

I can send you s spot face countersink! lol

[Czy_Horse]

Have you shot it yet? What are your early impressions?

Inside at the bow stop it was hard to notice a difference in noise, but there was a lot less vibration. Outside this afternoon shooting with the 2 - 380's and the Suppressor there was a noticeable difference in noise. Speed wise, I'm shooting 16.5 in. Zombies with 150 grain Bolt Cutter broad heads for a total weight of about 443 grains, speed ring on the Tact Zone is at about 320 fps. I did not re-install the rubber string thingies when I installed the new Boo string. It is dropping the Bolt Cutters right it there from 20-40 yards (did not shoot further then 40 yds).

Czy_Horse

[Patcon]

Thanks