Big John wrote:Any new arrow orders I do will have the New HD Orange Lumenoks installed if ordered. They have replaced the Red ones.
Battery life is still the same.
Currently have HD Orange and Pink .300 id.
Excellent!! Rather Happy to hear this Big John!
Once I get back to work I'll be giving you a call in this regard!
Pink BRIGHTER Luminoks behind Pink Wraps sounds deadly to me!!
SEW wrote:... In really low light situations it seems to illuminate the tgt or animal as it passes thru.
Nope, don't think that's simply your imagination Sew.
Seen the same myself a couple times now, and wasn't imbibing anything at the time..
Cheers,
Nog
"Political correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
CORALLUS wrote:Does anyone know if there are Lumenoks that fit the stock Diablo 18" bolts that come with the Grizzly package?
I just installed the new 30% brighter Orange Lumenoks in my Diablos a couple of days ago. You need the EXCF lighted nocks.
Keep in mind they will go in right out of the package but for me they were too tight. I shaved one of the inner "ridges" off and it seems to work much better as far as getting them to go on and off. By the way that is what the ridges are for .. to adjust the fit. Hope this helps.
I have pictures in another post : http://excaliburcrossbow.com/phpBB2/vie ... 2&start=15]
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
CORALLUS wrote:Does anyone know if there are Lumenoks that fit the stock Diablo 18" bolts that come with the Grizzly package?
I just installed the new 30% brighter Orange Lumenoks in my Diablos a couple of days ago. You need the EXCF lighted nocks.
Keep in mind they will go in right out of the package but for me they were too tight. I shaved one of the inner "ridges" off and it seems to work much better as far as getting them to go on and off. By the way that is what the ridges are for .. to adjust the fit. Hope this helps.
I have pictures in another post : http://excaliburcrossbow.com/phpBB2/vie ... 2&start=15]
I have found that you need to err on the tight side when doing this. I shaved my Lumenoks so I could turn them off by finger pressure when I first got them. They worked great for the first deer season but I found that apparently the carbon stretches over time as they started slipping a tad but enough to make them turn themselves off at times. So I added shims to them and all was fine again.
Then I bought new arrows and once again they fit tight without the shims installed and turn off fine with finger pressure. Next set I buy I will probably trim a little but not as much as I did the first ones.
I'm not saying shave all of them off. I wrote shaved one off. They are still tight but more manageable. Out of the package the string could not light them and it was almost impossible to wiggle off. Now they operate properly. I guess use your own judgement.
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
woot woot, I wish Lol