Micro supressor

Crossbow Hunting

Moderator: Excalibur Marketing Dude

Post Reply
kjl
Posts: 35
Joined: Sun Mar 29, 2015 6:08 am
Location: ontario, canada

Micro supressor

Post by kjl »

I m wondering where the rubber limb silencers should be?
I just bought my bow and they are uneven, not sure where to put them.
Has anyone used a chrono to test bolt speed with them closer to limb tips or near air brakes?
Any advice would be great!
micro suppressor
Ramcat broadheads 125 grain
.001 Black eagle zombie slayers 16.5 "
110 grain inserts, blazer vanes and lumenocks
kjl
Posts: 35
Joined: Sun Mar 29, 2015 6:08 am
Location: ontario, canada

Re: Micro supressor

Post by kjl »

I ve only shot mine into a bag Target at close range, i m waiting for the weather to warm up before I sight things in. I ve looked at several photos online and some are set close to the air brakes. Mine were put very close to adhesive rubber string pads near limb tips.
micro suppressor
Ramcat broadheads 125 grain
.001 Black eagle zombie slayers 16.5 "
110 grain inserts, blazer vanes and lumenocks
User avatar
ThunderXB
Posts: 431
Joined: Fri Feb 12, 2016 7:33 pm
Location: Wisconsin

Re: Micro supressor

Post by ThunderXB »

So let me ask you guys with Suppressors, how are they for quiet??

All the sound deadening stuff actually work?
Bulldog 400, Hawke XB30, JBK string, Dr S, TriggerT
405 Matrix, XBR, HAA, DM string, TT, ti64
405 Matrix Blackout, XBR, HAA, DM string, TT, ti64
kjl
Posts: 35
Joined: Sun Mar 29, 2015 6:08 am
Location: ontario, canada

Re: Micro supressor

Post by kjl »

I ll take your advice and move the limb silencers in towards the pads.
I had a matrix 380 until I bought the micro supressor. The first time I shot my micro was in my basement into a bag , I couldnt believe how much quieter it is compared to my previous bow. It probably would seem even quieter outside. The micro feels balanced, narrow and very comfortable but it's a fair bit harder to pull compared to the 380. I can't wait to go hunting, I m sure it will be much easier to walk through the brush and hunt from a treestand.
micro suppressor
Ramcat broadheads 125 grain
.001 Black eagle zombie slayers 16.5 "
110 grain inserts, blazer vanes and lumenocks
Dominic
Posts: 127
Joined: Thu Mar 10, 2016 3:36 pm
Location: Mannheim, Germany

Re: Micro supressor

Post by Dominic »

A question to the suppressor owners. If you have your hand/finger at the trigger, do you reach the safety with your thumb?
Micro Bulldog 335
Micro 308 Short
BD 330
Woodstock 342 (Matrix)
Matrix 355 with 310 Riser
User avatar
WVCBH
Posts: 81
Joined: Thu Dec 15, 2016 6:26 pm

Re: Micro supressor

Post by WVCBH »

Dominic wrote:A question to the suppressor owners. If you have your hand/finger at the trigger, do you reach the safety with your thumb?
Yes. Not quite as easily as on a rifle...but yes
EXCALsafety.jpg
Still lovin' my EXCALIBUR MICRO 355! :-)
Dominic
Posts: 127
Joined: Thu Mar 10, 2016 3:36 pm
Location: Mannheim, Germany

Re: Micro supressor

Post by Dominic »

WVCBH wrote:
Dominic wrote:A question to the suppressor owners. If you have your hand/finger at the trigger, do you reach the safety with your thumb?
Yes. Not quite as easily as on a rifle...but yes
EXCALsafety.jpg

That is not the supressor! ;) that's the normal Micro355
Micro Bulldog 335
Micro 308 Short
BD 330
Woodstock 342 (Matrix)
Matrix 355 with 310 Riser
User avatar
WVCBH
Posts: 81
Joined: Thu Dec 15, 2016 6:26 pm

Re: Micro supressor

Post by WVCBH »

Dominic wrote:
WVCBH wrote:
Dominic wrote:A question to the suppressor owners. If you have your hand/finger at the trigger, do you reach the safety with your thumb?
Yes. Not quite as easily as on a rifle...but yes
EXCALsafety.jpg

That is not the supressor! ;) that's the normal Micro355
Correct! Brain fart! I must have had "micro" stuck in my head! :lol:
Still lovin' my EXCALIBUR MICRO 355! :-)
kjl
Posts: 35
Joined: Sun Mar 29, 2015 6:08 am
Location: ontario, canada

Re: Micro supressor

Post by kjl »

No, I cannot keep my finger on the trigger and move safety.
micro suppressor
Ramcat broadheads 125 grain
.001 Black eagle zombie slayers 16.5 "
110 grain inserts, blazer vanes and lumenocks
Post Reply