405 Blackout
Moderator: Excalibur Marketing Dude
Re: 405 Blackout
SWEET!!!!!!!
Re: 405 Blackout
GrassyKnoll wrote:Again this is a fantastic looking bow... What did you use to raise the cheek weld with? I'm using XBR's on my bows and need to raise mine up a bit..
Yes, especially with the Optimizer, you need more cheekpiece height.
I did the same thing with my factory 405 and posted the DIY.
Here is the link:
http://www.excaliburcrossbow.com/phpBB2 ... =1&t=65454
The best tip is that when you drill the holes down into the stock from the top, you need to be very precise and careful to drill straight down and not too far or you'll potentially poke your drill bit out the "thinner" side of the stock.
My home made "arrow shaft carbon fiber spacers" were 1 9'16", but that met my needs you may need a different height based on your set up.
Bulldog 400, Hawke XB30, JBK string, Dr S, TriggerT
405 Matrix, XBR, HAA, DM string, TT, ti64
405 Matrix Blackout, XBR, HAA, DM string, TT, ti64
405 Matrix, XBR, HAA, DM string, TT, ti64
405 Matrix Blackout, XBR, HAA, DM string, TT, ti64
- GrassyKnoll
- Posts: 1421
- Joined: Sun Dec 12, 2010 9:13 am
- Location: Jackson, NJ
Re: 405 Blackout
ThunderXB wrote:GrassyKnoll wrote:Again this is a fantastic looking bow... What did you use to raise the cheek weld with? I'm using XBR's on my bows and need to raise mine up a bit..
Yes, especially with the Optimizer, you need more cheekpiece height.
I did the same thing with my factory 405 and posted the DIY.
Here is the link:
http://www.excaliburcrossbow.com/phpBB2 ... =1&t=65454
The best tip is that when you drill the holes down into the stock from the top, you need to be very precise and careful to drill straight down and not too far or you'll potentially poke your drill bit out the "thinner" side of the stock.
My home made "arrow shaft carbon fiber spacers" were 1 9'16", but that met my needs you may need a different height based on your set up.
Thanks so much for that...
Matrix 380 Xtra with Vortex Viper XBR, Trigger Tech,
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
- ROGER THAT
- Posts: 196
- Joined: Sat Apr 06, 2013 3:26 pm
- Location: Northern N.J.
Re: 405 Blackout
Black Bows Just Look
>>====>
Work Hard Hunt Harder
Matrix 380 Xtra (Serenity)
Matrix 405 (cwn annwn)
Matrix Bulldog 400 (Acwellen)
Matrix Grizzly (Armel)
Micro 355 (Siofra)
Work Hard Hunt Harder
Matrix 380 Xtra (Serenity)
Matrix 405 (cwn annwn)
Matrix Bulldog 400 (Acwellen)
Matrix Grizzly (Armel)
Micro 355 (Siofra)
Re: 405 Blackout
SEW,
String weighs 103.3 gr
String weighs 103.3 gr
Bulldog 400, Hawke XB30, JBK string, Dr S, TriggerT
405 Matrix, XBR, HAA, DM string, TT, ti64
405 Matrix Blackout, XBR, HAA, DM string, TT, ti64
405 Matrix, XBR, HAA, DM string, TT, ti64
405 Matrix Blackout, XBR, HAA, DM string, TT, ti64