Micro String change

sirwill · Post by **sirwill** » Fri Jun 30, 2017 7:54 am

I just ordered a Flemish string for my new Micro... I have read, even with the stringing aid it can be a little fussy to swap... Any tips?

Boo · Post by **Boo** » Fri Jun 30, 2017 10:06 am

Each string maker can tell you what to expect and how to deal with it. Ask your string maker.

newbie · Post by **newbie** » Fri Jun 30, 2017 11:55 am

make the stringing aid as short as you can to allow it JUST go over the limb tips. I have to fight with mine to just get it on.

BrotherRon · Post by **BrotherRon** » Fri Jun 30, 2017 2:19 pm

I sometimes snug it up a bit after I have the stringing aid on the limbs.

sirwill · Post by **sirwill** » Fri Jun 30, 2017 2:51 pm

Thank you for the reply's...

Czy_Horse · Post by **Czy_Horse** » Sat Jul 01, 2017 9:13 am

BrotherRon wrote:I sometimes snug it up a bit after I have the stringing aid on the limbs.

x2

Changing your string and adjusting brace height is a lot easier if you are using a C2 crank with the stringing aid.

Excalibur Crossbow Forum