C2 crank question

Crossbow Hunting

Moderator: Excalibur Marketing Dude

Post Reply
snowhunter
Posts: 37
Joined: Sun Dec 18, 2016 11:08 pm
Location: Naches, Washington

C2 crank question

Post by snowhunter »

When using the C2 on my 3 Matrix crossbows just before the string gets to the ADF I hear a thunk. This happens when the ratchet is not engaged. Should this be an area on concern? Thanks
Top
User avatar
Czy_Horse
Posts: 146
Joined: Sat Oct 03, 2015 12:28 pm
Location: SW Ontario

Re: C2 crank question

Post by Czy_Horse »

It's the rope slipping into position on the reel as you crank. Watch the take up reel, I find just after it starts the second layer the rope will slip/roll. Nothing to do with the bows.

Czy_Horse
Top
User avatar
robertyb
Posts: 2845
Joined: Mon Feb 06, 2012 8:35 pm
Location: Georgia

Re: C2 crank question

Post by robertyb »

Czy_Horse wrote:It's the rope slipping into position on the reel as you crank. Watch the take up reel, I find just after it starts the second layer the rope will slip/roll. Nothing to do with the bows.

Czy_Horse

X-2
About drove me crazy till I finally saw it slip. Now I just ignore it.
Wildlife Population Control Specialist
Top
Arrowflinger
Posts: 373
Joined: Sat Mar 19, 2016 4:51 pm
Location: China Spring, Tx

Re: C2 crank question

Post by Arrowflinger »

X2....... Sure made me pucker up too.
Matrix 350 LE 18 in. Diablos 150 gr. Boltcutters Zombie Slayers 150 gr. Slick Tricks C2 crank Hawkke XB 30 Pro SR
Top
Post Reply

Return to “Crossbow Hunting”