? About the Triggertech recall
Moderator: Excalibur Marketing Dude
-
- Posts: 1258
- Joined: Sun Apr 26, 2015 5:32 pm
- Location: VANCOUVER, WA
? About the Triggertech recall
Instead of taking the rail and trigger unit out, which will still require removing the scope rail to read it (as I think it's on top )? Can't I just remove the scope rail or ( ADF equipped rail ) on my Micro 335 while leaving it in the stock ?
Gene
Gene
Camo Micro 355 w/ XB30 SR Pro & TT trigger
Camo Matrix 380 W/ XB 30SR Pro & a Boo trigger
Very Nice 98 Jeep Tj
Sweet old 73 Bronco ( 2nd Owner)
Scamp tralier
Camo Matrix 380 W/ XB 30SR Pro & a Boo trigger
Very Nice 98 Jeep Tj
Sweet old 73 Bronco ( 2nd Owner)
Scamp tralier
-
- Posts: 69
- Joined: Tue Dec 08, 2015 1:01 pm
- Location: Trenton, ON
Re: ? About the Triggertech recall
The s/n is on the bottom so you you do need to remove it from the rail...
Re: ? About the Triggertech recall
Quintehunter wrote:The s/n is on the bottom so you you do need to remove it from the rail...
.....I removed the stock from the rail, then removed the trigger assembly (with scope still attached) from the rail....really was not much of an issue.
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
-
- Posts: 1258
- Joined: Sun Apr 26, 2015 5:32 pm
- Location: VANCOUVER, WA
Re: ? About the Triggertech recall
Great ! I really did not want to have to remove the scope or scope rail as I have her dialed in really well out to 55 yards.
I did as you suggested and found my Micro trigger is "Good To Go" and not effected by the recall.
Gene
I did as you suggested and found my Micro trigger is "Good To Go" and not effected by the recall.
Gene
Camo Micro 355 w/ XB30 SR Pro & TT trigger
Camo Matrix 380 W/ XB 30SR Pro & a Boo trigger
Very Nice 98 Jeep Tj
Sweet old 73 Bronco ( 2nd Owner)
Scamp tralier
Camo Matrix 380 W/ XB 30SR Pro & a Boo trigger
Very Nice 98 Jeep Tj
Sweet old 73 Bronco ( 2nd Owner)
Scamp tralier
Re: ? About the Triggertech recall
Here are the Excalibur triggers affected:
https://www.cpsc.gov/Recalls/2017/trigg ... w-triggers
Excalibur
S/N: 2448, 2500, 4113-4332, 4345-4448, 5077, 5088-5180
Date Code: BAE001-BAE095, BCE001-BCE061, BDE001-BDE029, BFE001-BFE020, BGE001-BGE039
My trigger has a serial number of 0724-003, and I can't read Date Code. I suppose I have a real early mode, Can I assume it isn't part of the recall?
https://www.cpsc.gov/Recalls/2017/trigg ... w-triggers
Excalibur
S/N: 2448, 2500, 4113-4332, 4345-4448, 5077, 5088-5180
Date Code: BAE001-BAE095, BCE001-BCE061, BDE001-BDE029, BFE001-BFE020, BGE001-BGE039
My trigger has a serial number of 0724-003, and I can't read Date Code. I suppose I have a real early mode, Can I assume it isn't part of the recall?
ComfyBear
Micro Axe 340, Matrix 380, Matrix 355, Matrix 350, Exocet 200
ComfyBear Strings
G5 Montecs 125gr., SlickTrick 125 gr. Magnums
To thine own self be true.
Remove thine mask Polonius.
Live thy truth, doth not be false to any man.
Micro Axe 340, Matrix 380, Matrix 355, Matrix 350, Exocet 200
ComfyBear Strings
G5 Montecs 125gr., SlickTrick 125 gr. Magnums
To thine own self be true.
Remove thine mask Polonius.
Live thy truth, doth not be false to any man.
Re: ? About the Triggertech recall
....I would...I couldn't find the date code either....I do not know why they give both...It only adds to the confusion...the SN is clearly shown and that is what I went with!ComfyBear wrote:Here are the Excalibur triggers affected:
https://www.cpsc.gov/Recalls/2017/trigg ... w-triggers
Excalibur
S/N: 2448, 2500, 4113-4332, 4345-4448, 5077, 5088-5180
Date Code: BAE001-BAE095, BCE001-BCE061, BDE001-BDE029, BFE001-BFE020, BGE001-BGE039
My trigger has a serial number of 0724-003, and I can't read Date Code. I suppose I have a real early mode, Can I assume it isn't part of the recall?
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: ? About the Triggertech recall
Mine in the Matrix 355 had no serial/date markings at all. Still need to pull the one in my REM 700.
MATRIX 355
HAWKE XB1
Trigger Tech Trigger
20in BEE
Various broadheads
Quick, accurate, simple
HAWKE XB1
Trigger Tech Trigger
20in BEE
Various broadheads
Quick, accurate, simple
Re: ? About the Triggertech recall
... it should be engraved on the bottom alongside the trigger lever!FORVOLS wrote:Mine in the Matrix 355 had no serial/date markings at all. Still need to pull the one in my REM 700.
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: ? About the Triggertech recall
Not all are on the bottom,
Mine was half way up the side. Had to completely pull it to see it.
Mine was half way up the side. Had to completely pull it to see it.
Wildlife Population Control Specialist
Re: ? About the Triggertech recall
I just had a date code (which was not listed) and did not see a s/n on my trigger unit.
- Micro Suppressor
- Triggertech Trigger
- Triggertech Trigger
Re: ? About the Triggertech recall
....see other thread on the TT recall...I posted an image of where it is on the trigger .
Anthony
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: ? About the Triggertech recall
They should put the serial number on the top
Excalibur Revx
Hawke Xb 30 pro
16.5 inch wyverncreations.com zombie slayers
SWAT juggernaut broadhead
Hawke Xb 30 pro
16.5 inch wyverncreations.com zombie slayers
SWAT juggernaut broadhead
-
- Posts: 1258
- Joined: Sun Apr 26, 2015 5:32 pm
- Location: VANCOUVER, WA
Re: ? About the Triggertech recall
If they did put it on top you would have to remove the scope mount ( or ADF ) rail to read it.
Many people have had issues with the small factory screws stripping out that hold the rail to the trigger after they had previously applied the blue loctite.
I was happy to just remove the 2 screws holding stock to rail and then the 2 holding trigger to rail as they do not strip out as easily.... once the trigger is removed from the rail my ser# was easily seen and verified as needing no recall.
This also left my optics intact with no need to sight back in.
I simply re-applied a bit of blue loctite to the 4 screws and assured their tightness and allowed to cure overnight. All was good.
Gene
Many people have had issues with the small factory screws stripping out that hold the rail to the trigger after they had previously applied the blue loctite.
I was happy to just remove the 2 screws holding stock to rail and then the 2 holding trigger to rail as they do not strip out as easily.... once the trigger is removed from the rail my ser# was easily seen and verified as needing no recall.
This also left my optics intact with no need to sight back in.
I simply re-applied a bit of blue loctite to the 4 screws and assured their tightness and allowed to cure overnight. All was good.
Gene
Camo Micro 355 w/ XB30 SR Pro & TT trigger
Camo Matrix 380 W/ XB 30SR Pro & a Boo trigger
Very Nice 98 Jeep Tj
Sweet old 73 Bronco ( 2nd Owner)
Scamp tralier
Camo Matrix 380 W/ XB 30SR Pro & a Boo trigger
Very Nice 98 Jeep Tj
Sweet old 73 Bronco ( 2nd Owner)
Scamp tralier
Re: ? About the Triggertech recall
I had to move my scope up three clicks at 20 yards to get my -0- back after checking mine. I probably torqued the screws a little tighter then they were.
Wildlife Population Control Specialist
Re: ? About the Triggertech recall
Has anybody received their replacement trigger yet ? They received my recalled trigger on 7/24 and I still have yet to get my replacement trigger. They had promised 5 working days to mail out replacement .