micro limbs on a matrix

Crossbow Hunting

Moderator: Excalibur Marketing Dude

Post Reply
mingle
Posts: 78
Joined: Thu Jun 14, 2012 9:27 am
Location: SE michigan

micro limbs on a matrix

Post by mingle »

Wiil micro limbs fit on a matrix
paulaboutform
Posts: 4970
Joined: Sun Nov 24, 2013 11:32 pm
Location: Coquitlam, British Columbia

Re: micro limbs on a matrix

Post by paulaboutform »

Even if they do, don't do it! They're too short to put on the longer rail and that's a great way to get hurt...potentially. Kinda like putting matrix limbs on the older Exo series rails.

Paul
You're only paranoid if everyone isn't out to get you.
Keep your friends close and your enemies closer.
My enemy's friend is also my enemy.
shafferm
Posts: 300
Joined: Thu Jan 17, 2008 7:04 pm
Location: Mason, Michigan

Re: micro limbs on a matrix

Post by shafferm »

Yes and no, the limbs will bolt into place on the riser. The largest power stroke Micro is on the Micro 355 which is 10 inches and is pulling 280 pounds. The shortest power stroke on the smallest Matrix is around 11 inches for something like a Matrix 310 or Sapphire. Unless you are shortening a Matrix rail to have a power stroke of 10 inches or less it would be beyond current factory limits on the Micro limbs. Going over 10 inches power stroke on Micro limbs is going to rapidly get you over 300 pounds to pull it back and you may start to see unusual failures to go along with the higher draw weight. Not recommended without having a shortened rail.
2002 Exomag
Varizone with Burris Sig. Zee Rings
My mods:
Scope cover adapters
Optomechanical rangefinder
Custom built lit nocks
BCY Trophy flemish string
20" XX75 2219 arrows with 4" feathers
User avatar
janesy
Posts: 4721
Joined: Sat Dec 05, 2015 8:20 pm
Location: Beavertown. Ont

Re: micro limbs on a matrix

Post by janesy »

We need a popcorn emoji
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
User avatar
BrotherRon
Posts: 2178
Joined: Thu Aug 28, 2014 2:47 am
Location: North Central Wisconsin
Contact:

Re: micro limbs on a matrix

Post by BrotherRon »

janesy wrote:
Tue Nov 07, 2017 7:57 am
We need a popcorn emoji
:lol:
Matrix 310 ~ Hawke XB30 Pro SR ~ TT~Plano 36" All Weather Tactical Hard Case.
Danny Miller Top Mount Quiver.
Strings by Boo ~ nchunterkw ~ 8ptbuk
Jeremiah 29:13 :thumbup:
Arrowflinger
Posts: 373
Joined: Sat Mar 19, 2016 4:51 pm
Location: China Spring, Tx

Re: micro limbs on a matrix

Post by Arrowflinger »

Hold my beer, I got this.
Matrix 350 LE 18 in. Diablos 150 gr. Boltcutters Zombie Slayers 150 gr. Slick Tricks C2 crank Hawkke XB 30 Pro SR
vixenmaster
Posts: 13618
Joined: Wed Sep 14, 2005 3:51 pm
Location: Western Ky

Re: micro limbs on a matrix

Post by vixenmaster »

Puttin Micro limbs on any matrix over a 10 .250 " stroke will be waitin on limbs to break. Now you can put Matrix limbs on a Micro n have a very easy shootin model to practice wid all year!
Half Bubble Off BD360

[email protected] 417-505-9315
MicroMan355
Posts: 35
Joined: Thu Apr 20, 2017 5:43 am

Re: micro limbs on a matrix

Post by MicroMan355 »

Fuhgeddaboudit!!! :shock:
mingle
Posts: 78
Joined: Thu Jun 14, 2012 9:27 am
Location: SE michigan

Re: micro limbs on a matrix

Post by mingle »

thxs for the input.Was just thinking outloud lol.
User avatar
Carnivorous
Posts: 3740
Joined: Sun Dec 25, 2005 12:56 pm
Location: Belleriver Ontario

Re: micro limbs on a matrix

Post by Carnivorous »

If you cut the mainframe down a bit, you can make a sweet micro-matrix hybrid. Just thinking out of the box here.. Lol
A touch of frost has heightened your awareness and your heart steadily beats in anticipation. Your senses are suddenly alert to the movement on the forest floor and you realize that the moment of truth is at hand.
User avatar
cadmaster
Posts: 139
Joined: Wed Aug 26, 2015 2:35 pm
Location: North Bay, Ontario
Contact:

Re: micro limbs on a matrix

Post by cadmaster »

I imagine you are looking for more performance. There are a lot of older prematrix (exo) bows that were frankenbowed with matrix and middleton limbs/risers for high FRS I believe some were into the 420 FPS range. considering all the limb problems in the high power designs (which are probably due to minute flaws in very powerful limbs. I would not recommend increasing the design draw length that is all ready in use with the matrix and micro designs.
Post Reply