Can someone tell me what distance both scribe marks are from the front end on an Ibex alum rail?
I have a smf & there arent any marks on it.
Thanx!
Ibex
Moderator: Excalibur Marketing Dude
-
- Posts: 4250
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Re: Ibex
Im away cant look today but if anyone has a alluminum axiom its also the same.
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Re: Ibex
installed the string stops and adjusted the space like a credit card thickness or 2. then i hated the \extra weight and took them off. i then shot it thru a chrono and played with twists in each direction and found the fastest speed and left it there. i did this with all my Excals and found the sweet spots. i use a thin piece of white or black electrical tape to mark the side of the rail. makes it is easy on a glance if the string need to be twisted to get it back over time.
-
- Posts: 4250
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Re: Ibex
With dr stririp bumpers on my ibex its basically set on the highest brace height mark. Im probably not getting the fastest speed but it shoots perfect. That bow is just totally tolerant of any thing you do to it or shoot thru it. Its my favorite out of all my bows.
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Re: Ibex
LBJ,longbow joe wrote: ↑Sun Jan 21, 2018 3:53 pmWith dr stririp bumpers on my ibex its basically set on the highest brace height mark. Im probably not getting the fastest speed but it shoots perfect. That bow is just totally tolerant of any thing you do to it or shoot thru it. Its my favorite out of all my bows.
What is your measurement from the bumpers to the front of the serving?
Thanx,
GregO
>>>------->
Ibex
Ten Point Pro Elite Arrows
125 gr Magnus Stingers
Lumenoks
>>>------->
Ibex
Ten Point Pro Elite Arrows
125 gr Magnus Stingers
Lumenoks
-
- Posts: 4250
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Re: Ibex
Dr stirrup says they should touch very lightly into the bumpers. ...l have a credit card width. In the end its even with the last ( furthest mark). If you have the factory bumbers l would go 3/16 that was my setting before dr stririp. I really think the dr stririps are superior. They are tougher and quieter.
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.