Vixenmaster string

Crossbow Hunting

Moderator: Excalibur Marketing Dude

Post Reply
Mo-hunter
Posts: 17
Joined: Mon Dec 07, 2015 2:20 pm
Location: Central Missouri

Vixenmaster string

Post by Mo-hunter »

I just put on a new string from vixenmaster. This is my first custom string. Simply awesome! Thank you Mike for the improvement on my micro 315. 😀
Dave
SEW
Posts: 1745
Joined: Fri Dec 12, 2014 9:55 am
Location: NE Arkansas

Re: Vixenmaster string

Post by SEW »

They are excellent!
longbow joe
Posts: 4246
Joined: Sat Jun 06, 2015 9:55 pm
Location: south eastern pa (bucks county)

Re: Vixenmaster string

Post by longbow joe »

Ive gottsted a few envelopes from da land of rocks a few times.All the string makers on our site are good l cant complain about any of em. There was a guy on here makin em out of cotton ......we ran em off ...they stretched a lot .
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Arrowflinger
Posts: 373
Joined: Sat Mar 19, 2016 4:51 pm
Location: China Spring, Tx

Re: Vixenmaster string

Post by Arrowflinger »

Vixenmaster makes a very nice string. His serving lasts three times longer than a factory string .
Matrix 350 LE 18 in. Diablos 150 gr. Boltcutters Zombie Slayers 150 gr. Slick Tricks C2 crank Hawkke XB 30 Pro SR
User avatar
elkaholic
Posts: 678
Joined: Wed Jul 26, 2017 6:27 pm
Location: Phoenix, Arizona

Re: Vixenmaster string

Post by elkaholic »

wasn't someone making them with built in silencers like a tarantula but string material

did it make a difference ?
papabear1
Posts: 1272
Joined: Tue Oct 13, 2015 4:46 pm
Location: southwest Mo. in the ozarks

Re: Vixenmaster string

Post by papabear1 »

Mike makes a very good string for sure. !!!!!!

Dave :wink:
2010 equinox,
known as doe bow
vixenmaster custom string
swacker bhs, 2/1/4" cut 120 grn.
xx75 Easton 2219,s
firebolt arrows
S5 pads
if it ain't broke don't fix it
be safe in all you do
see ya in the woods
<-------<
xcaliber
Posts: 12821
Joined: Fri Jan 11, 2013 7:35 pm
Location: NW Indiana

Re: Vixenmaster string

Post by xcaliber »

Mike makes a nice string, cannot go wrong with his strings! Not a bad guy to yap with either! :wink:
It’s not the way you rock, it’s the way that you roll!
hankenhunter
Posts: 2978
Joined: Mon Jul 12, 2010 10:21 pm
Location: Thompson/Nicola, British Colombia

Re: Vixenmaster string

Post by hankenhunter »

That's why his name is in my sig. Never had a strand break, serving loosen, nor premature wear. Shot per string is phenomenal. Have heard the same about our other respected string twisters. I'd say were pretty lucky to have them.
Hank
Back strap
Posts: 43
Joined: Tue Jun 27, 2017 9:45 pm
Location: Hernando county Fl.

Re: Vixenmaster string

Post by Back strap »

Have 3 Vixen master strings. Practiced all last summer with one approximately 500 shots. Killed 8 point and 4pt and a fat hog 200lbs (sow). No noticeable wear yet. Other two pre-stretched with approximately 100 shots each. Force 10 and two 8190s. My opinion can't get any better. Thank you again Mike.
Matrix 405// Twilight scope/ Vixen master string/ Munch mount/ aircurve 3 kwikee kwiver/ south shore archery 18 in spinal tapps/ plastic nock/ sk300 vanes/ 92 grain insert/100 grain ramcat. Huntin Fishin Lovin everyday. AKA-BUCKY
Post Reply