Hybrid?
Moderator: Excalibur Marketing Dude
Re: Hybrid?
Effectively now, most if not all the bows are running the micro riser .
You can put matrix limbs on a micro as its been done a few times. But you cannot put micro limbs on a matrix. They technically fit, but the power stroke is too much.
You can put matrix limbs on a micro as its been done a few times. But you cannot put micro limbs on a matrix. They technically fit, but the power stroke is too much.
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: Hybrid?
You can build hybrid bows with some machine work to shorten the mainframe, too. I've got a Matrix riser/limb assembly on an Exomax mainframe/stock. I had to shorten the mainframe down to the same length as a Matrix 380 to do it safely. I did it because I wanted a full camo crossbow with a standard rifle stock instead of a thumbhole stock, and it was fairly inexpensive for me to do the project that way.
This would only work with aluminum mainframes, by the way... as far as I know you couldn't safely shorten a composite mainframe.
Good luck,
~E
This would only work with aluminum mainframes, by the way... as far as I know you couldn't safely shorten a composite mainframe.
Good luck,
~E
Re: Hybrid?
Search for "Pipsqueak"
Vixenmaster has spent a considerable amount of time shooting with a hybrid
Vixenmaster has spent a considerable amount of time shooting with a hybrid
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme