Matrix 310

[Ragumup]

Hi got a few questions does the 310 have a level or swepted back riser ? Does the c2 crank fit it and is the power stroke 10& quarter inches ? Thanks in advance.

[gerald strine]

Not sure on riser but the power stroke is 11.37 and a C2 will work.

[Boo]

It's pretty much a 330 with a swept back riser.

[seabee401]

Don't mean to hijack the post, but is the 310 a bit easier to cock with the rope cocker than the 330?
Thanks,
Tom

[Boo]

Don't mean to hijack the post, but is the 310 a bit easier to cock with the rope cocker than the 330?
Thanks,
Tom

It's 210 vs 220 lbs of pull.

[BrotherRon]

Don't mean to hijack the post, but is the 310 a bit easier to cock with the rope cocker than the 330?
Thanks,
Tom

Yes, it is slightly easier to cock.

[seabee401]

Don't mean to hijack the post, but is the 310 a bit easier to cock with the rope cocker than the 330?
Thanks,
Tom

Yes, it is slightly easier to cock.

OK. Good. Because I just purchased a " like new" used 310. I own a 330 and can cock it easily, but wanted something a little easier yet but wanted to stay in the 200 # platform. My 350 , I can cock for hunting , but with my injuries it starts to hurt at around 3 or 4 times. That's when the C2 comes out!
Tom

[Ragumup]

So the c2 will fit and it has a swept back riser great.
Just found it’s says the power stroke is 10.87 is that 10 & three quarters inches ?

[Arrowflinger]

Thereabouts; 10.75 is 10 3/4 so without a calculator about 10 7/8

[gerald strine]

Not sure on riser but the power stroke is 11.37 and a C2 will work.

I got the 11.37 power stroke off of The Ecalibur 2017 quick reference guide.

[Bcxbow]

From excalibur manual.

[gerald strine]

From excalibur manual.


[/quoate] I wonder which is correct both of our information came from Excalibur I think the longer length was the old riser but not sure as it was in a 2017 reference guide

[Bcxbow]

I’m not sure either GS, that one came with new bow last year.

Billy

[seabee401]

From excalibur manual.


[/quoate] I wonder which is correct both of our information came from Excalibur I think the longer length was the old riser but not sure as it was in a 2017 reference guide

i
I saw the 2017 manual also stating 11.37" power stroke also. That's strange.
Maybe we're confusing it with the Sapphire, which has a 10.8" power stroke , also stated in the 2017 manual???

[Ragumup]

I’m thinking the rails are exactly the same length but it’s just the riser is swept back which changes the brace height which changes the power stroke... ? I’m now wondering if it’s the same on the micro 335 vs 355 also ,anyone shed more light on this please?