YUP!
Triggertech for my 335
Moderator: Excalibur Marketing Dude
- Tangle Eye
- Posts: 133
- Joined: Mon Feb 19, 2018 12:21 am
- Location: Jackson, TN
Re: Triggertech for my 335
The straight slot with a dremel and flat screwdriver was what got both of these troublesome screws out.xcaliber wrote: ↑Tue May 15, 2018 6:11 pmI have a good set from Cobalt, and never have an issue with good fasteners. Ball end Allen's are a must! I have had to use a cutoff wheel for the Dremmel Tool to make a straight slot, and while fastener was still hot, hit it with a straight screw driver, and that always works. I had a friend come by with a sight on his vertical that he could not get the fasteners out, Cobalt Allen's got one out, then it turned his sight whilst turning the faster with the wrench, and BAM! Problem solved. The real key sometimes is to stay cool, and think it through.
———————————————————————————————————
Excalibur Assassin w/ Boo Force 10 string
If you always do what you always did, you’ll always get what you always got.
Excalibur Assassin w/ Boo Force 10 string
If you always do what you always did, you’ll always get what you always got.