mounting a charger crank on a matrix 380

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

Post Reply
codye
Posts: 14
Joined: Sun Jan 31, 2016 9:17 am
Location: S E Alberta
Contact:

mounting a charger crank on a matrix 380

Post by codye » Tue Aug 21, 2018 8:07 am

good morning forum
I purchased a charger E X T from bass pro in Calgary yesterday.
drove 3 hrs to home and no instruction on the retrofit for older
xcals has anyone done this retro ? old guy needs some info lol
thanks gang have fun and be safe
matrix 380 BO
TC 54 renegade PC
marlin 3030 336 RC G

User avatar
Boo
Posts: 12269
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Re: mounting a charger crank on a matrix 380

Post by Boo » Tue Aug 21, 2018 1:15 pm

Remove the crank handle and place onto the stock so that the felt pad sits on the curve of the cheek piece and the flat of the Charger sits flat on the stock. Insert the both bases and pay attention to the arrows on the bases. You'll have to tape in the right side.See picture.
Using a fine felt marker or mechanical pencil, mark the out the left base as well as you can.
Remove the Charger and stick the left base on and locate the holes with a mechanical pencil. You'll have to extend the led lots. Then drill and attach.
Image
If there are no dogs in heaven then I want to go where they went. Will Rogers
Si vis pacem, para bellum
Before you push send, keep in mind that the high road has no poop to step on.

codye
Posts: 14
Joined: Sun Jan 31, 2016 9:17 am
Location: S E Alberta
Contact:

Re: mounting a charger crank on a matrix 380

Post by codye » Tue Aug 21, 2018 9:25 pm

good evening gang
thanks boo the picture is worth a thousand words
looks dams simple . you and the gang here have a good evening.
matrix 380 BO
TC 54 renegade PC
marlin 3030 336 RC G

User avatar
RobD
Posts: 245
Joined: Wed Feb 18, 2015 12:14 pm
Location: Mt. Pleasant, MI

Re: mounting a charger crank on a matrix 380

Post by RobD » Fri Sep 28, 2018 10:09 am

Boo -

Is the crank's string long enough to reach the 380's string without having to pull the 380's string up?
BD400 - Up for sale - see the Trading Post!
Micro 360 TD Pro
Micro 360 TD
Matrix 380 Blackout (amythntr's Jelly Belly)

ADF | Vixenmaster strings - Love 'em! | TriggerTech | DrStirrup - Good stuff man! | Munchmounts | XV530IR

User avatar
Boo
Posts: 12269
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Re: mounting a charger crank on a matrix 380

Post by Boo » Fri Sep 28, 2018 10:41 am

RobD wrote:
Fri Sep 28, 2018 10:09 am
Boo -

Is the crank's string long enough to reach the 380's string without having to pull the 380's string up?
Nope, you need to pull the string up about an inch.
If there are no dogs in heaven then I want to go where they went. Will Rogers
Si vis pacem, para bellum
Before you push send, keep in mind that the high road has no poop to step on.

Post Reply