Nock removal

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

Post Reply
Forkston
Posts: 31
Joined: Sun Dec 17, 2017 1:04 pm

Nock removal

Post by Forkston » Fri Sep 14, 2018 11:03 am

Best way to remove flat nocks from black eagle executioner arrows without damaging the arrows. to install lighted nocks

mr meat
Posts: 4513
Joined: Mon Jan 05, 2009 4:40 pm
Location: The land of ice and snow North Bay

Re: Nock removal

Post by mr meat » Fri Sep 14, 2018 12:00 pm

Think they should just be pushed in! If you have a set of Danny Miller arrow pullers just grab the nock and pull and maybe twist
vixen 11
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200

matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen

User avatar
nchunterkw
Posts: 2334
Joined: Sat Dec 24, 2011 11:21 am
Location: Wake Forest, NC
Contact:

Re: Nock removal

Post by nchunterkw » Fri Sep 14, 2018 12:24 pm

They are not glued in. Just pull them out. Maybe need some channel locks or adjustable pliers. Super simple
Keith
"I can explain it to you...but I can't understand it for you"

Micro, Vortex
RamCat, Slick Trick
BE Zombie, TF Feathers, Trinity Strings
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><

grouse
Posts: 269
Joined: Mon Oct 22, 2012 5:08 pm
Location: Missouri

Re: Nock removal

Post by grouse » Sun Sep 16, 2018 4:37 pm

I cut the bent part off a wire coat hanger leaving a straight thin rod about 20" long. Then I unscrewed and removed the target tip and poked the nock out with the stiff wire rod. Poke it hard and it will come out easily enough. I just did it again Thursday afternoon to get ready for our Saturday opener.
axiom
350 SE

User avatar
bigbowman
Posts: 449
Joined: Wed Sep 15, 2010 10:04 am
Location: Ripon, WI

Re: Nock removal

Post by bigbowman » Sun Sep 16, 2018 4:45 pm

I got a piece of 1/8 steel rod 24” long from Ace Hardware. Just insert the rod through the insert and one small tap on the rod and the nocks pop right out! Even works on glued in nocks too! Good luck!
Exomax
Hawke XB1 1.5-5×32 SR
20” Spynal Tapp Arrows
Muzzy HB Ti Broadheads
Vixen II
Hawke XB1 1.5-5x32 SR
20” Spynal Tapp Arrows
RaptorTrick Broadheads

Forkston
Posts: 31
Joined: Sun Dec 17, 2017 1:04 pm

Re: Nock removal

Post by Forkston » Wed Sep 11, 2019 3:01 pm

I want to Thank everybody with their suggestions, what i ended up doing was taking the practice tip out and screwing it into the flat nok and grabbing it with channel loks very easy

Hester0305
Posts: 2258
Joined: Sun Dec 18, 2011 6:23 pm
Location: North Carolina

Re: Nock removal

Post by Hester0305 » Wed Sep 11, 2019 3:06 pm

I use nock pliers if they are the plastic ones, if they're the aluminum ones like I use I screw a field point in the nock and then just pull them out with pliers
Matrix 350 SE for Me HHA Leupold 2-7x33
Matrix 350 SE for Mrs. Hester
Black Eagle Zombie Slayers
TruGlo Titanium X Hybrid Broadheads
NAP FOC Broadheads
Boo, Vixenmaster, Xcaliber, 8ptbuk Custom Strings,

Post Reply