charger EXT crank on a 380 or 355 matrix

[Dogguy]

I am looking at buying a Micro 360 take down with the charger EXT crank, I currently have a matrix 355 and a 380. How hard would it be to use the crank on the 355 or 380 bows.
I am thinking of buying an extra base so I can use the crank on either bow, but not sure how the different draw lengths will work with the crank?

any advice?
Thanks in advance, Dogguy.

[hunter with MS]

you will have to retrofit it to the them . But it can be done .

[Bcxbow]

See below previous post by Boo on this topic.

Copy & paste

http://www.excaliburcrossbow.com/phpBB3/viewtopic.php?f=1&t=69681&p=678575&hilit=Charger#p678575

[janesy]

Not a big deal at all. Go for the 360TD, it's sweet.

Saw a couple of 360's walk out the door at EastHill the other night, man was I jealous.

[Boo]

Using it on the 380 is really easy, not a big amount of effort at all. The 405 and the 355 Micro is a breeze as well. On my 380, you have to lift the string about an inch to engage the hooks.

[Dogguy]

thanks all for the feedback,

I'm going with the 360 take down pro, and retro fitting the crank so it will work on the 380 and prob. sell the 355 in the late summer.

Take care and be safe