I was at bow shop and saw them using solder iron to remove inserts ..
They sell this tool also..
So took my arrow to lowes to see if I could get screw with threads like field point...
I found screw I think it was like 32number on pack and about inch and half long..
Cut head off screw and took solder point out of my iron and put screw in ...
Let it heat up fir 5 minutes and screwed arrow in ...
Worked ok got insert out ....
Arrow was not real hot ....
Removing inserts
Moderator: Excalibur Marketing Dude
Re: Removing inserts
sproulman wrote: ↑Wed Aug 07, 2019 6:34 amI was at bow shop and saw them using solder iron to remove inserts ..
They sell this tool also..
So took my arrow to lowes to see if I could get screw with threads like field point...
I found screw I think it was like8/ 32number on pack and about inch and half long..
Cut head off screw and took solder point out of my iron and put screw in ...
Let it heat up fir 5 minutes and screwed arrow in ...
Worked ok got insert out ....
Arrow was not real hot ....
Re: Removing inserts
Thanks for the tip.
Matrix 355----Scorpion
Hawke XB1
DrStirrup Products All
nchunterkw,Boo strings
Steelforce B.H.
Magnus B.H. Ser-Razor 125 gr.
SPYNAL TAPP
Nufletch Ignitors
NockOut Lighted Nocks
Hawke XB1
DrStirrup Products All
nchunterkw,Boo strings
Steelforce B.H.
Magnus B.H. Ser-Razor 125 gr.
SPYNAL TAPP
Nufletch Ignitors
NockOut Lighted Nocks