TAC Bracket Short ... anyone using one on their Micro/Assassin?

Crossbow Hunting

Moderator: Excalibur Marketing Dude

Post Reply
User avatar
XcaliburFX
Posts: 478
Joined: Sat Jan 26, 2013 8:48 pm
Location: Carrollton, Georgia

TAC Bracket Short ... anyone using one on their Micro/Assassin?

Post by XcaliburFX »

Basically, the title says it all. If you are using one, how well does it fit and stay in place? Any issues with it loosening up etc?
Assassin 360 Strata
BEA Zombie Slayer - BEA Executioner
Boo/VixenMaster/Xcaliber/NCHunterKW Strings
User avatar
amythntr
Posts: 6994
Joined: Wed Nov 13, 2013 12:26 pm
Location: T.P.R.N.J.

Re: TAC Bracket Short ... anyone using one on their Micro/Assassin?

Post by amythntr »

.... according to the Excalibur website under accessories... the TacPac short will fit the A360... I had one on my Matrix 380 and Micro 335... never loosened on those CB’s... conceptually it sounded great to have but I found it was more of a PITA than what it was worth.... also I found that it hanged how the bow is balanced.... I’m sure some will chirp in that it’s “the Cats meow”... for me the added weight and the balance was what made me change....

... in fact, if I can find a few of the parts mine will hit the trading post...

Anthiny :eusa-naughty:
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.

Anthony :D

A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
User avatar
XcaliburFX
Posts: 478
Joined: Sat Jan 26, 2013 8:48 pm
Location: Carrollton, Georgia

Re: TAC Bracket Short ... anyone using one on their Micro/Assassin?

Post by XcaliburFX »

Thanks Anthony, I have been using the original Tac Pac for several years on my Matrix bows, and personally I like them. However, the new short style bracket is my only concern, with such an amount of metal milled away and the sling nut being there I just wanted to make sure it fit well to my older Tac Pac, or if I should modify my old one somehow to work. :think:
Assassin 360 Strata
BEA Zombie Slayer - BEA Executioner
Boo/VixenMaster/Xcaliber/NCHunterKW Strings
User avatar
Doe Master
Site Admin
Posts: 4741
Joined: Sun Jun 25, 2006 7:57 am
Location: Baden , Ontario

Re: TAC Bracket Short ... anyone using one on their Micro/Assassin?

Post by Doe Master »

I have one on my Micro . It allows me to attach my camera on the bow as well as the quiver is why I did it . :)
As for your concern about the sling stud . There is a lot more meat on the bracket than on the mainframe .
Prone est ut nos es plurimus periculosus
User avatar
amythntr
Posts: 6994
Joined: Wed Nov 13, 2013 12:26 pm
Location: T.P.R.N.J.

Re: TAC Bracket Short ... anyone using one on their Micro/Assassin?

Post by amythntr »

Doe Master wrote:
Thu Aug 22, 2019 5:54 am
I have one on my Micro . It allows me to attach my camera on the bow as well as the quiver is why I did it . :)
As for your concern about the sling stud . There is a lot more meat on the bracket than on the mainframe .
....Kevin...can you post a picture of your rig with the tac pac short and camera?....that would be the ONLY reason I would reconsider it’s use!

....thanks Kevin....

Anthony :thumbup:
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.

Anthony :D

A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
longbow joe
Posts: 4246
Joined: Sat Jun 06, 2015 9:55 pm
Location: south eastern pa (bucks county)

Re: TAC Bracket Short ... anyone using one on their Micro/Assassin?

Post by longbow joe »

I like gorilla tape and my I phone.
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
User avatar
amythntr
Posts: 6994
Joined: Wed Nov 13, 2013 12:26 pm
Location: T.P.R.N.J.

Re: TAC Bracket Short ... anyone using one on their Micro/Assassin?

Post by amythntr »

longbow joe wrote:
Thu Aug 22, 2019 1:06 pm
I like gorilla tape and my I phone.
..... you must be a cast member of the Alaskan Bush People!🤪... but I do like your ingenuity👍.... I, at least, hope you are using camo colored gorilla tape Joe and NOT the Grey colored one!😂😂

Anthony😊
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.

Anthony :D

A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
longbow joe
Posts: 4246
Joined: Sat Jun 06, 2015 9:55 pm
Location: south eastern pa (bucks county)

Re: TAC Bracket Short ... anyone using one on their Micro/Assassin?

Post by longbow joe »

Jeff the carnivore uses black. Lol. Seriously l was actually looking into the tac cam this is all good info.
All this tec stuff has its price to pay in one way or another.
A friend bought the ozone machine............after 2 weeks he grew real tired of hauling it back n forth wasn't worth the weight of itself but it did definitely work.
I found a shower and clean clothes work pretty good too.
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
User avatar
Doe Master
Site Admin
Posts: 4741
Joined: Sun Jun 25, 2006 7:57 am
Location: Baden , Ontario

Re: TAC Bracket Short ... anyone using one on their Micro/Assassin?

Post by Doe Master »

I have my quiver bracket on one side and the straightened out quiver bracket on the other side . That way I can view the camera from my side . The downside was the camera is upside down . So you have to flip it in editing . My remedy to that was to mount a bracket on a Munch mount . :)
Image
Image
Prone est ut nos es plurimus periculosus
User avatar
XcaliburFX
Posts: 478
Joined: Sat Jan 26, 2013 8:48 pm
Location: Carrollton, Georgia

Re: TAC Bracket Short ... anyone using one on their Micro/Assassin?

Post by XcaliburFX »

Thanks, I am talking about the Tac Bracket short though. Like this one, I have the regular bracket, but it will not work on my Assassin.
Image
Assassin 360 Strata
BEA Zombie Slayer - BEA Executioner
Boo/VixenMaster/Xcaliber/NCHunterKW Strings
User avatar
Doe Master
Site Admin
Posts: 4741
Joined: Sun Jun 25, 2006 7:57 am
Location: Baden , Ontario

Re: TAC Bracket Short ... anyone using one on their Micro/Assassin?

Post by Doe Master »

Truth be known I thought I had the short one on the Micro . But when I pulled it out I was wrong . :lol:
Prone est ut nos es plurimus periculosus
User avatar
XcaliburFX
Posts: 478
Joined: Sat Jan 26, 2013 8:48 pm
Location: Carrollton, Georgia

Re: TAC Bracket Short ... anyone using one on their Micro/Assassin?

Post by XcaliburFX »

Been there done that :) Still do from time to time lol
Assassin 360 Strata
BEA Zombie Slayer - BEA Executioner
Boo/VixenMaster/Xcaliber/NCHunterKW Strings
Post Reply