C2 Crank
Moderator: Excalibur Marketing Dude
-
- Posts: 516
- Joined: Mon Apr 22, 2019 7:17 pm
- Location: New Brunswick, Canada
Re: C2 Crank
Do you not have a local machine shop? There should be one close by. Maybe your local trade school might do that little project.
I have the C2 and you are correct you have to be very careful and hang on to it.
Wayne
I have the C2 and you are correct you have to be very careful and hang on to it.
Wayne
Re: C2 Crank
I bumped an older post, the original poster is a good guy, and a friend. PM him, or hit his email link.
It’s not the way you rock, it’s the way that you roll!
Re: C2 Crank
Offer still stands PM me if anyone would be willing to do this. This is the only complaint I have about excalibur that god darn handle on the c2 crank
Re: C2 Crank
I would like to thank shafferm for helping me with the c2 crank excellent job so if anyone like myself would like a bigger crank i would contact him
Re: C2 Crank
You are quite welcome, glad to hear that it is working out better than the original. I made the longer handle by starting with a piece of 1" round stock and cleaning it up a bit and then knurling it on the lathe. I drilled through the center to match the diameter of the shoulder bolt and also opened up one side to make clearance for the head of the shoulder bolt to pass through. With this setup you can use the original shoulder bolt and spacer that Excalibur used originally. The original handle is on the left and the new one is shown on the right.
2002 Exomag
Varizone with Burris Sig. Zee Rings
My mods:
Scope cover adapters
Optomechanical rangefinder
Custom built lit nocks
BCY Trophy flemish string
20" XX75 2219 arrows with 4" feathers
Varizone with Burris Sig. Zee Rings
My mods:
Scope cover adapters
Optomechanical rangefinder
Custom built lit nocks
BCY Trophy flemish string
20" XX75 2219 arrows with 4" feathers
-
- Posts: 516
- Joined: Mon Apr 22, 2019 7:17 pm
- Location: New Brunswick, Canada
Re: C2 Crank
Very nice work!
-
- Posts: 516
- Joined: Mon Apr 22, 2019 7:17 pm
- Location: New Brunswick, Canada
Re: C2 Crank
Stepnoutnb wrote: ↑Thu Sep 05, 2019 4:51 amVery nice work! I’m jealous! Or is that green with envy !
Re: C2 Crank
Looks like a great upgrade
vixen 11
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen