I have read on the forum that you can remove the decals on bolts with acetone. Can this be accomplished with a simple wipe down or do you need to soak them for a period of time?
Thanks
Removing Decals From Bolts
Moderator: Excalibur Marketing Dude
Removing Decals From Bolts
Matrix Bulldog 440
BOO Custom Strings
Vortex Crossfire II
18 Inch Zombies with 110 Grain Brass Inserts
125 Grain Slick tricks
2 Inch Blazer Vanes with Right Helical
BOO Custom Strings
Vortex Crossfire II
18 Inch Zombies with 110 Grain Brass Inserts
125 Grain Slick tricks
2 Inch Blazer Vanes with Right Helical
Re: Removing Decals From Bolts
Soak with a paper towel wet with acetone, that will loosen it up pretty good. I’m impatient so I use a Scotch Brite scrubbing pad with acetone, works great.
It’s not the way you rock, it’s the way that you roll!
Re: Removing Decals From Bolts
....I use the paper towel soaked in acetone
....it gets a little sloppy, just make sure the arra doesn’t have any residue when you are done!
Anthony
....it gets a little sloppy, just make sure the arra doesn’t have any residue when you are done!
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: Removing Decals From Bolts
When using the paper towel method suggested what's the soak time?
Matrix Bulldog 440
BOO Custom Strings
Vortex Crossfire II
18 Inch Zombies with 110 Grain Brass Inserts
125 Grain Slick tricks
2 Inch Blazer Vanes with Right Helical
BOO Custom Strings
Vortex Crossfire II
18 Inch Zombies with 110 Grain Brass Inserts
125 Grain Slick tricks
2 Inch Blazer Vanes with Right Helical
Re: Removing Decals From Bolts
Wear appropriate protective gloves using acetone and clean shafts outside.
I use a heavy duty paper towel soaked with acetone and rub decal off .
Next , to finish final removal I use clean paper towel and acetone .
Inspect , touch up and done..
I use a heavy duty paper towel soaked with acetone and rub decal off .
Next , to finish final removal I use clean paper towel and acetone .
Inspect , touch up and done..
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Re: Removing Decals From Bolts
No soak time at all. I just removed some decals on BE Zombies. A little acetone on a cloth and rub it back and forth and the decal will begin to melt away within seconds. You will ruin the cloth so use something disposable. Start to finish you can get the decal off in a minute. The wetter the cloth, the quicker (and messier) the removal.
DuckHunt
DuckHunt
Micro Wolverine/Matrix 350 SE
Recovering Excalaholic
Recovering Excalaholic
Re: Removing Decals From Bolts
X2DuckHunt wrote: ↑Wed Sep 04, 2019 6:57 pmNo soak time at all. I just removed some decals on BE Zombies. A little acetone on a cloth and rub it back and forth and the decal will begin to melt away within seconds. You will ruin the cloth so use something disposable. Start to finish you can get the decal off in a minute. The wetter the cloth, the quicker (and messier) the removal.
DuckHunt
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings