Charger crank
Moderator: Excalibur Marketing Dude
Charger crank
Ok, I screwed up I got it tightend up so bad I can’t release it. The release button is jammed. IV tried everything any ideas.
Micro 335
Micro Suppressor 355
Micro Suppressor 355
Re: Charger crank
Put a little more pressure on cranking while pushing the release button. Mine does the same thing sometimes, thought it was jammed up. Somebody told me to do that, and it will release
Micro Suppressor 400 TD (Two of 'em)
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Matrix 380
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Matrix 380
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
-
- Posts: 226
- Joined: Fri Sep 26, 2014 4:33 pm
- Location: Ohio
Re: Charger crank
If it won’t release when it is fully cranked I found if you push the crank handle forward a little you can then hit the button to release it. I hope that makes sense I had mine lock up and wasn’t able to get it released I searched the internet for help and ended up finding one of Excalibur’s instructional videos on the crank and after I watched the video was able to get it working hope this helps.
Last edited by OhioXBowhunter on Thu Oct 10, 2019 12:30 am, edited 1 time in total.
400 Suppressor TD
Bulldog 440
Matrix 405
Black Eagle Zombies
Black Eagle Executioners
G5 Montecs / Mega meats
Bulldog 440
Matrix 405
Black Eagle Zombies
Black Eagle Executioners
G5 Montecs / Mega meats
-
- Posts: 226
- Joined: Fri Sep 26, 2014 4:33 pm
- Location: Ohio
Re: Charger crank
It doesn’t take much to release it when you press the handle forward.
Last edited by OhioXBowhunter on Thu Oct 10, 2019 12:34 am, edited 1 time in total.
400 Suppressor TD
Bulldog 440
Matrix 405
Black Eagle Zombies
Black Eagle Executioners
G5 Montecs / Mega meats
Bulldog 440
Matrix 405
Black Eagle Zombies
Black Eagle Executioners
G5 Montecs / Mega meats
Re: Charger crank
Are the hooks on the holding pins? If so, pop them off first then try to release, or crank a bit more with your thumb on the release toggle. If that doesn't work, get a picture to someone here to post, and we'll get you fixed up.
It’s not the way you rock, it’s the way that you roll!