refinish laminate stock?

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

Post Reply
User avatar
Robinsons Rebel
Posts: 71
Joined: Sat Jun 18, 2016 12:48 pm
Location: Denham Springs,Louisiana

refinish laminate stock?

Post by Robinsons Rebel » Mon Dec 30, 2019 6:51 pm

Going to try to refinish a laminate stock after the season comes to an end. I've seen some videos on you tube an such with them using tru oil. Never seen them seal it after. Any thoughts from anybody who has done it? Thanks.
2016 Matrix Grizzly (Red Bud)
18¨ Diablo lumenock bolts
100 gr. X-Act broadheads
Nikon Bolt XR
R.E.D.S

Normous
Posts: 6945
Joined: Tue Jan 03, 2006 3:04 pm
Location: Windsor, Ontario.

Re: refinish laminate stock?

Post by Normous » Mon Dec 30, 2019 7:31 pm

In the past I have owned two laminate stocks, one from Ruger and the other my Custom Henegar grey/black thumbhole that nicely complimented my Matrix 405, both needed a finish refresh.

I didn't choose Tru oil but chose Tung Oil as my first attempt to renew their finishes. Tung Oil is a hard drying wood oil made from the seed of a Tung tree that provides a beautiful finish, it resists marring and penetrates well.

To start ,what I did was clean the stock then sand with 0000 Steel Wool and clean again before applying tung oil by hand using a cotton cloth. The next day after drying I would lightly sand again then clean with a damp cloth before applying another coat.

Since I had time over the winter my coating count was between 5 and 6 . When finished, the end visual and important stock feel was certainly improved and further down the road proved very durable after use.
EXCALFFLICTION 1991 ->>---------> 2019
Kustom Krug Micro 355, Matrix 355 and NEMESIS
LEUPOLD VX-R 2-7, TRIJICON SRO Optics
Boo Strings
SWAT BH's
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Nature Is My Nurse

User avatar
robertyb
Posts: 2531
Joined: Mon Feb 06, 2012 8:35 pm
Location: Georgia

Re: refinish laminate stock?

Post by robertyb » Tue Dec 31, 2019 7:53 am

Proper" tung oil is just oil. Tru-Oil, and many products that are labeled as tung oil without the word "pure," are polymerized oil. Tru-Oil hardens more than true tung oil and wears through more slowly. It is also able to be polished up to a gloss surface.
Wildlife Population Control Specialist

gerald strine
Posts: 2912
Joined: Mon Nov 30, 2009 7:41 pm
Location: southern Michigan

Re: refinish laminate stock?

Post by gerald strine » Tue Dec 31, 2019 8:55 am

I have refinished several gun stocks with Tru oil and it is a beautiful finish. It requires mutipul coats with sanding in between with 0000 steel wool between coats but the results are very nice.
If you private message me your phone # I could send a picture of a refinished stock.
Hunt eat sleep repeat.

Post Reply