Can someone please tell me the inside diameter of the quill arrows?
Is it .300
I removed the aluminum inserts from my quills and replaced them with 110gr brass inserts to give them more weight so I can shoot the two dozen or so 100 gr spitfires I have and for the life of me I can’t remember the size
Thanks in advance
Quill question...
Moderator: Excalibur Marketing Dude
-
- Posts: 2856
- Joined: Mon Oct 25, 2010 9:02 pm
- Location: S.E. Georgia
- Contact:
Quill question...
Bulldog m380 blackout
Micro 355
Matrix 350LE
Vixen II
Proud member of the Georgia Meat Hunter's Association
"Shooting tomorrow's trophy's...today"
Micro 355
Matrix 350LE
Vixen II
Proud member of the Georgia Meat Hunter's Association
"Shooting tomorrow's trophy's...today"
-
- Posts: 457
- Joined: Sat Aug 18, 2018 8:10 pm
- Location: Sout. Illinois
Re: Quill question...
I believe their website says .300
matrix 380, 18" BEZS, Boostring
micro 315, 17" BE Execs. Vixenmaster
Axiom SMF, FIRE BOLTS Vixenmaster
micro 315, 17" BE Execs. Vixenmaster
Axiom SMF, FIRE BOLTS Vixenmaster
Re: Quill question...
....yup, .300 ID
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
-
- Posts: 2
- Joined: Fri Sep 09, 2016 9:51 pm
Re: Quill question...
Hi. Been a reader for some time and got useful info, but this is my first post. Just upgraded my 380 Mad Max for a Micro Suppressor 400 TD and I just stripped some vanes target shooting...so I took the arrow apart tonight... a Quill 16.5" by Black Eagle for Excalibur. FYI, the rear Rhino insert is 3/4" OAL and weights in at 20.4 grains on my loading scales. The front insert is huge....twice the length of the old Diablo bolts. It is 1 5/8" long and weights 62.4 grains. My reloading caliper put them at 0.298" in diameter, which is the hole diameter of the Quill bolts. By the way, I put in an old 150 grain field point, heated it up gently while tugging on the bolt. Came out easily. Not enough heat to melt any carbon fibres. I have some Diablo inserts and also Gold Tip 110 grain and they boh fit fine in the bolts. I believe they are labelled as .0300". Hope this is of use to someone.georgiaboy wrote: ↑Sat Aug 15, 2020 7:25 pmCan someone please tell me the inside diameter of the quill arrows?
Is it .300
I removed the aluminum inserts from my quills and replaced them with 110gr brass inserts to give them more weight so I can shoot the two dozen or so 100 gr spitfires I have and for the life of me I can’t remember the size
Thanks in advance
-
- Posts: 613
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Quill question...
Easton Quills are 0.3015 and Black Eagle Quills are 0.300
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360