Limb and Riser swap
Moderator: Excalibur Marketing Dude
-
- Posts: 26
- Joined: Sat Mar 24, 2007 9:18 pm
- Location: Fond du Lac, WI
Limb and Riser swap
I have a Matrix Sapphire and a Matrix 355. What do I get if I swap risers and limbs from one to the other?
-
- Posts: 4259
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Re: Limb and Riser swap
Both limbs are exactly the same and I'm pretty sure risers are the same the rail length determines the poundage.
The sapphire stock would be very unbalanced if you put the 355 rail on it . And you would have to tap another hole for the fore grip. Screw.
In simple terms you'll get nothing.
Someone will correct me if I'm wrong about the riser on the sapphire it may be swept back but l dought it. I have both but l dont have them here to look
The sapphire stock would be very unbalanced if you put the 355 rail on it . And you would have to tap another hole for the fore grip. Screw.
In simple terms you'll get nothing.
Someone will correct me if I'm wrong about the riser on the sapphire it may be swept back but l dought it. I have both but l dont have them here to look
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
-
- Posts: 26
- Joined: Sat Mar 24, 2007 9:18 pm
- Location: Fond du Lac, WI
Re: Limb and Riser swap
The Sapphire has a swept back riser and the Matrix 355 has a forward riser. It is a straight up swap.
-
- Posts: 26
- Joined: Sat Mar 24, 2007 9:18 pm
- Location: Fond du Lac, WI
Re: Limb and Riser swap
The Sapphire should gain and the Matrix 355 should lose. End up with two 330's ?