Blazer vanes

[mchurch]

What helical is recommended for broadhead stabilization with 2 inch blazer vanes

[Boo]

I think it’s not necessary for mechanical broadheads but I highly recommend it for fixed broadheads. The Arizona EZ Fletch Bolt

[bigbowman]

I use the Blazer Jig at 3 degree offset for my Blazer vanes. Good luck!

[xcaliber]

I think it’s not necessary for mechanical broadheads but I highly recommend it for fixed broadheads. The Arizona EZ Fletch Bolt

[Hester0305]

It probably doesn't matter if it's right or left helical but I've always used a right helical. I also like the Arizona EZ Fletch for Bolts

[CT.HNTR]

The Arizona EZ Fletch Bolt is the best thing to use for Blazer vanes. It's a true helical fletching

[bigbowman]

The Blazer jig is also a true 3 degree right helical offset. They also have a straight jig plate if you don't need a helical offset. You can't tell the difference between a fletched arrow from the Blazer jig or a factory fletched arrow.

[papabear1]

I think it’s not necessary for mechanical broadheads but I highly recommend it for fixed broadheads. The Arizona EZ Fletch Bolt
[/quot

oops my bad

[Farmer]

I'm with Don , Arizona Ez Bolt ...My fixed heads fly like darts !

[TCX]

2" Blazers
Right helical on aluminum arrows.
125 grain fixed 4 blade Muzzy broadheads.
JoJan fletcher.

[amythntr]

.....what the helical is this all about.....

.....I have seen a lot of pros and cons as to which is the better; offset or helical.

.....I know that the arrows provided with the crossbows are "offset."

.....so what say you and why?

[TCX]

.....what the helical is this all about.....

.....I have seen a lot of pros and cons as to which is the better; offset or helical.

.....I know that the arrows provided with the crossbows are "offset."

.....so what say you and why?

Using a JoJan fletcher, I'm getting more offset and very little helical with 2" blazers. Now this is me and someone else using a JoJan may be able to get a full helical.
Anyway they steer my Muzzy broadheads well from a Ibex and Matrix 310.
Yes, I believe I would have good results fletching 2" blazers with a straight clamp/offset.

[amythntr]

....the question is not being able to "get" helical. The question is which is better?....is it a preference and why is one better than the other?

[TCX]

....the question is not being able to "get" helical. The question is which is better?....is it a preference and why is one better than the other?

Ok then. Just trying to help.

[Normous]

....the question is not being able to "get" helical. The question is which is better?....is it a preference and why is one better than the other?

- YouTube University has your answer my friend.