Matrix Limb

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

Post Reply
seabee401
Posts: 225
Joined: Sat Jun 04, 2011 10:32 pm
Location: New Jersey

Matrix Limb

Post by seabee401 » Wed Dec 09, 2020 8:06 pm

While checking brace height on my Matrix 350se I noticed the string was not centered on the middle of the left limb. Further inspection from the limb tip looking in revealed a slight twist in the left limb.
Is this a big problem? Could the string loop cause this?
Thanks
Tom
Phoenix I, Phoenix II, Excocet 200, Vortex, Matrix 350Se, Matrix 330, Matrix 310

xcaliber
Posts: 11430
Joined: Fri Jan 11, 2013 7:35 pm
Location: NW Indiana

Re: Matrix Limb

Post by xcaliber » Thu Dec 10, 2020 4:27 pm

Shoot it. You'll know if it's way off. Center the string back up and see what happens.
Matrix 380 (Max) Nikon P3 / TT / SWAT A-4 Mini Heads
Axe 340 Kryptek (Axe) Nikon P3 / SWAT A-4 Mini Heads
Vortex (Kix) Nikon P3 / TT / Bigfoot / SWAT Hybrid Heads

okie143
Posts: 56
Joined: Thu Jan 16, 2014 12:02 pm
Location: Oklahoma

Re: Matrix Limb

Post by okie143 » Sat Dec 19, 2020 11:40 pm

I would take pictures and send in a Support Request to Excalibur.

You want to ensure no damage to you or the crossbow.
Excalibur Axiom 305 SMF with ADF
2017 Excalibur Matrix 380 Tact-Zone Lite-Stuff Crossbow Package
Diablo Excalibur bolts with Excalibur Boltcutter and Trailblazer Broadheads
Lumenok Lighted Nocks
Retired/100% Disabled Veteran

seabee401
Posts: 225
Joined: Sat Jun 04, 2011 10:32 pm
Location: New Jersey

Re: Matrix Limb

Post by seabee401 » Sun Dec 20, 2020 3:36 pm

Yes I called warranty and they were really good. Said I could just send in riser with limbs and they would take care of it. I had the option of them sending me new limbs but I didn't want the trouble with getting the bolts out.
Thanks
Tom
Phoenix I, Phoenix II, Excocet 200, Vortex, Matrix 350Se, Matrix 330, Matrix 310

Post Reply