While checking brace height on my Matrix 350se I noticed the string was not centered on the middle of the left limb. Further inspection from the limb tip looking in revealed a slight twist in the left limb.
Is this a big problem? Could the string loop cause this?
Thanks
Tom
Matrix Limb
Moderator: Excalibur Marketing Dude
Matrix Limb
Phoenix I, Phoenix II, Excocet 200, Vortex, Matrix 350Se, Matrix 330, Matrix 310
Re: Matrix Limb
Shoot it. You'll know if it's way off. Center the string back up and see what happens.
It’s not the way you rock, it’s the way that you roll!
Re: Matrix Limb
I would take pictures and send in a Support Request to Excalibur.
You want to ensure no damage to you or the crossbow.
You want to ensure no damage to you or the crossbow.
Excalibur Axiom 305 SMF with ADF
2017 Excalibur Matrix 380 Tact-Zone Lite-Stuff Crossbow Package
Diablo Excalibur bolts with Excalibur Boltcutter and Trailblazer Broadheads
Lumenok Lighted Nocks
Retired/100% Disabled Veteran
2017 Excalibur Matrix 380 Tact-Zone Lite-Stuff Crossbow Package
Diablo Excalibur bolts with Excalibur Boltcutter and Trailblazer Broadheads
Lumenok Lighted Nocks
Retired/100% Disabled Veteran
Re: Matrix Limb
Yes I called warranty and they were really good. Said I could just send in riser with limbs and they would take care of it. I had the option of them sending me new limbs but I didn't want the trouble with getting the bolts out.
Thanks
Tom
Thanks
Tom
Phoenix I, Phoenix II, Excocet 200, Vortex, Matrix 350Se, Matrix 330, Matrix 310