Safety lever
Moderator: Excalibur Marketing Dude
Safety lever
Hi all, The trigger lever on my micro is a bit hard to push off of safety into the fire position.. it’s not smooth like it should be.. gotta really use some force to get it the entire way up.. is it ok to spray some wd 40 or something in there or will it freeze up in cold weather. Supposed to be 28 tomorrow morning.. thanks
Re: Safety lever
What does it feel like to push the safety lever to safe? Have you done anything to the bow recently?
Some people just like stepping on rakes
Re: Safety lever
It feels fine going to safe..just a bit stubborn pushing up to get to fire position.. I sprayed some rem oil in there top and bottom of the lever and worked it back and forth about 50 times and it seems fine now.
-
- Posts: 603
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Safety lever
There's a little spring and ball with detent in there. Was probably a little gummy and you did the right thing cleaning with some wd40.
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: Safety lever
Thanks seems good now.. we’ll see been hunting in rain and snow last few days.. good luck all