TD Compatibility?
Moderator: Excalibur Marketing Dude
TD Compatibility?
I don't know if the extremities and rails will be compatible between TD models...
It was an idea that I was thinking about today and I don't know if you have tried it before in the forum.
But it would be amazing to be able to exchange, for example, a 400 bow with an assassin/micro/bulldog stock, etc, as needed...
With the same bow, having different platforms to quickly switch between light and heavy, for example (my situation/desire, hahahaha).
Did you see any disadvantages or advantages?
I know that some of you make frankenbows and it would be something similar... But more "commercial".
It was an idea that I was thinking about today and I don't know if you have tried it before in the forum.
But it would be amazing to be able to exchange, for example, a 400 bow with an assassin/micro/bulldog stock, etc, as needed...
With the same bow, having different platforms to quickly switch between light and heavy, for example (my situation/desire, hahahaha).
Did you see any disadvantages or advantages?
I know that some of you make frankenbows and it would be something similar... But more "commercial".
Assassin 400TD
Re: TD Compatibility?
A 400 TD front end will fit on a 340 TD and work quite well. I was getting something in the 370+ range. You wouldn't want to do it the other way around, because I'm not confident that the limbs on the 340 TD would survive the draw length of the 400 TD rail. In addition to being beefier, the 400 TD limbs have a different tip design that allows for a longer draw length.
I like the idea, but it could get expensive really quick. Today the only way to have other options it to buy more bows. And I'm pretty sure that's just the way they like it.
I killed a nice buck with my 370+ TD, then they came out with the Micro 380 and ruined everything. Now it's the only one that leaves the yard.
I like the idea, but it could get expensive really quick. Today the only way to have other options it to buy more bows. And I'm pretty sure that's just the way they like it.
I killed a nice buck with my 370+ TD, then they came out with the Micro 380 and ruined everything. Now it's the only one that leaves the yard.
Micro Wolverine/Matrix 350 SE
Recovering Excalaholic
Recovering Excalaholic
Re: TD Compatibility?
How long have you been a member here ??? That didn't take long
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: TD Compatibility?
Take a look, if there are meetings near you. They call themselves EA, which stands for Excalibur Anonymous.
Greetings from Germany!
My Dealer here (armbrustmarkt.de) has 1,5lbs Single Stage Triggertech if you are interested!
Greetings from Germany!
My Dealer here (armbrustmarkt.de) has 1,5lbs Single Stage Triggertech if you are interested!
Micro Bulldog 335
Micro 308 Short
BD 330
Woodstock 342 (Matrix)
Matrix 355 with 310 Riser
Micro 308 Short
BD 330
Woodstock 342 (Matrix)
Matrix 355 with 310 Riser
Re: TD Compatibility?
Soon I will go to those meetings, at this rate...
I'll check out that archery website!!
The Spanish ones are very expensive and of scarce material and this one is more dedicated to a vertical bow than to a crossbow.
Normally I buy in France or Italy.
You are German!! I have an aunt residing in Düsseldorf for more than 20 years.
Assassin 400TD
Re: TD Compatibility?
There is also arrowinapple.com
Pretty sure they ship everywhere and also have cool dealer models we can't get over here
Pretty sure they ship everywhere and also have cool dealer models we can't get over here
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
-
- Posts: 611
- Joined: Thu Feb 21, 2019 3:23 pm
Re: TD Compatibility?
You can put a 420TD (matrix limb'd) front end on these rails:
400TD (HO micro)
360TD (standard micro)
340TD (standard micro)
Of these the first would be the best, IMO, but would really only get you to have something that draws and shoots similar to a GRZ2, Matrix Sapphire, Matrix 310. The other 2 even slower, but still are great shooters. I have a matrix limb'd micro 355 and love it for recreational and 3D shooting.
And can put a 400TD (HO micro) front end on these rails:
360TD
340TD
Of these, the first would get you one that is basically the same as the new Micro 380, except having TD. The 2nd one gets you a 360 (or 370 by duck hunt's experience), but with lower limb stress relative to what the HO limbs can handle, compared to the standard micro limb'd 360.
And a 360TD front end on a 340TD rail....and you'd end up with a 340TD
Can go top-down in each list. But can't really go down-up and not be over-stressing limbs.
400TD (HO micro)
360TD (standard micro)
340TD (standard micro)
Of these the first would be the best, IMO, but would really only get you to have something that draws and shoots similar to a GRZ2, Matrix Sapphire, Matrix 310. The other 2 even slower, but still are great shooters. I have a matrix limb'd micro 355 and love it for recreational and 3D shooting.
And can put a 400TD (HO micro) front end on these rails:
360TD
340TD
Of these, the first would get you one that is basically the same as the new Micro 380, except having TD. The 2nd one gets you a 360 (or 370 by duck hunt's experience), but with lower limb stress relative to what the HO limbs can handle, compared to the standard micro limb'd 360.
And a 360TD front end on a 340TD rail....and you'd end up with a 340TD
Can go top-down in each list. But can't really go down-up and not be over-stressing limbs.
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: TD Compatibility?
Thank you very much!! It was exactly what I was wondering.wheelsquad wrote: ↑Thu Dec 15, 2022 12:27 pmYou can put a 420TD (matrix limb'd) front end on these rails...
Assassin 400TD