Hand Strap C2 Crank???
Moderator: Excalibur Marketing Dude
-
- Posts: 66
- Joined: Thu Jun 18, 2009 2:49 pm
- Location: Spring, TX
Hand Strap C2 Crank???
Anyone figure out how to put a hand strap on the original C2 crank?
Re: Hand Strap C2 Crank???
I've never tried. The crank handle is sufficiently long that the average person shouldn't get overwhelmed when operating the crank. Anyway, the antireverse pawl positively locks the system. The only real risk would be while uncocking, and with the device mounted on the stock, foot in the stirrup, and with the long handle, there's enough leverage to have good control.
The only other time would be cocking the bow silently, by depressing the pawl so that it didn't click while the bowstring was being pulled back into the cocked position. There again, done carefully, the risk is minimal.
The only other time would be cocking the bow silently, by depressing the pawl so that it didn't click while the bowstring was being pulled back into the cocked position. There again, done carefully, the risk is minimal.
"Gun Control Laws"--trying to nag criminals into submission.
-
- Posts: 611
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Hand Strap C2 Crank???
Could probably use a Charger fail-safe strap if you were to replace the knob on the C2 to be compatible with a knob that is shaped like the Charger's knob.forrest-hunter wrote: ↑Fri Apr 19, 2024 12:10 pmAnyone figure out how to put a hand strap on the original C2 crank?
But the handle doesn't quick detach on the C2 so you'd have the strap permanently attached to the handle as well.
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
-
- Posts: 66
- Joined: Thu Jun 18, 2009 2:49 pm
- Location: Spring, TX
Re: Hand Strap C2 Crank???
im elderly and worry about handle getting away from me - i have an extra strap but haven't been able to find knob to keep it on - I use to use the rope to de-cock but have am losing strength
Re: Hand Strap C2 Crank???
I recall reading here about someone making a longer handle. Better leverage might make control easier.
If it’s the decocking function that is your concern, why not just carry an old arrow with you, and fire it into a target or the ground when you are done shooting?
If it’s the decocking function that is your concern, why not just carry an old arrow with you, and fire it into a target or the ground when you are done shooting?
"Gun Control Laws"--trying to nag criminals into submission.
Re: Hand Strap C2 Crank???
Try this ⬇Hi5 wrote: ↑Sun Apr 21, 2024 11:39 amI recall reading here about someone making a longer handle. Better leverage might make control easier.
If it’s the decocking function that is your concern, why not just carry an old arrow with you, and fire it into a target or the ground when you are done shooting?
https://www.excaliburcrossbow.com/phpBB3/viewtopic.php?p=686012#p686012
Hybrid Micro BD 360
Micro Mag 340
Boo Strings - Trinity Strings
Zombie Slayers
Swat & TOTA Broadheads
Micro Mag 340
Boo Strings - Trinity Strings
Zombie Slayers
Swat & TOTA Broadheads
Re: Hand Strap C2 Crank???
Hi5 wrote: ↑Sun Apr 21, 2024 11:39 amI recall reading here about someone making a longer handle. Better leverage might make control easier.
If it’s the decocking function that is your concern, why not just carry an old arrow with you, and fire it into a target or the ground when you are done shooting?
2010 equinox,
known as doe bow
vixenmaster custom string
swacker bhs, 2/1/4" cut 120 grn.
xx75 Easton 2219,s
firebolt arrows
S5 pads
if it ain't broke don't fix it
be safe in all you do
see ya in the woods
<-------<
known as doe bow
vixenmaster custom string
swacker bhs, 2/1/4" cut 120 grn.
xx75 Easton 2219,s
firebolt arrows
S5 pads
if it ain't broke don't fix it
be safe in all you do
see ya in the woods
<-------<
Re: Hand Strap C2 Crank???
Might be possible to build an adapter to go on a C2 that would let you use the newer crank handle. Would need to get ahold of one of the newer cranks and a handle to do some measuring to see how hard it would be to build.
2002 Exomag
Varizone with Burris Sig. Zee Rings
My mods:
Scope cover adapters
Optomechanical rangefinder
Custom built lit nocks
BCY Trophy flemish string
20" XX75 2219 arrows with 4" feathers
Varizone with Burris Sig. Zee Rings
My mods:
Scope cover adapters
Optomechanical rangefinder
Custom built lit nocks
BCY Trophy flemish string
20" XX75 2219 arrows with 4" feathers