Proper way to sight in overwatch scope ?
Moderator: Excalibur Marketing Dude
Proper way to sight in overwatch scope ?
Just wonder how you sight in the overwatch scope ?
Rev X
Boo String
Rev X arrows
Swacker 150 grain
3x9 leuopold scope
Boo String
Rev X arrows
Swacker 150 grain
3x9 leuopold scope
Re: Proper way to sight in overwatch scope ?
Youtube University features a few videos how to sight in crossbow scopes or any scope.
Below pertains to the Overwatch scope.
Copy/paste:
https://www.youtube.com/watch?v=LZcjmvSgTyc
Tip:: Degrease all scope mount fasteners and tap hole threads to prevent fastener creep or loosing when subjected to vibration. Tap holes and fasteners always contain manufacturing oils which are not your friend mounting scopes properly.
Below pertains to the Overwatch scope.
Copy/paste:
https://www.youtube.com/watch?v=LZcjmvSgTyc
Tip:: Degrease all scope mount fasteners and tap hole threads to prevent fastener creep or loosing when subjected to vibration. Tap holes and fasteners always contain manufacturing oils which are not your friend mounting scopes properly.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Re: Proper way to sight in overwatch scope ?
Donno if there’s a “proper” way.
I use the deck of the mainframe because it determines the POI, not the limbs. I use a plumb line to get the vertical set because it is more accurate and I don’t trust the scope turret. I zero at 20 yards. Then I stack 2 targets at 40 yards and shoot at a mark at the top of the top target using the center crosshairs. Then while holding the crosshairs on the top mark of the top target, I move the speed ring until the 40 yard marker is on the arrow that I shot. A bit of fine tuning is sometimes needed with the speed ring and the vertical reticle at 40 yards but the horizontal reticle remains untouched.
I use the deck of the mainframe because it determines the POI, not the limbs. I use a plumb line to get the vertical set because it is more accurate and I don’t trust the scope turret. I zero at 20 yards. Then I stack 2 targets at 40 yards and shoot at a mark at the top of the top target using the center crosshairs. Then while holding the crosshairs on the top mark of the top target, I move the speed ring until the 40 yard marker is on the arrow that I shot. A bit of fine tuning is sometimes needed with the speed ring and the vertical reticle at 40 yards but the horizontal reticle remains untouched.
Some people just like stepping on rakes
Re: Proper way to sight in overwatch scope ?
Here is Bill Troubridge, the founder of Excalibur talking about sighting in Excalibur scopes.
https://www.youtube.com/watch?v=yxhjwqoImAk
https://www.youtube.com/watch?v=yxhjwqoImAk
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family