I need one string tester.
Moderator: Excalibur Marketing Dude
I need one string tester.
You need to own a 225 lb bow
You must own a reliable chronograph
Have good hearing
Have good note taking abilities
Must be a very good shooter with the ability to shoot 30 yard or more from a bench
He/she must have lots of experience shooting and the ability to shoot 300 or more shots in the next couple of weeks
You cannot have any pre-existing problems like a rough latch that is eating your serving
What he or she cannot have is excuses.
If you have what I want please send me an email. You will end up with a string and a container of Dalton 2000 string conditioner. The string material I want tested is pretty slick and the serving may separate but it promises to be a slightly faster material than I am using now with a lower noise signature.
You must own a reliable chronograph
Have good hearing
Have good note taking abilities
Must be a very good shooter with the ability to shoot 30 yard or more from a bench
He/she must have lots of experience shooting and the ability to shoot 300 or more shots in the next couple of weeks
You cannot have any pre-existing problems like a rough latch that is eating your serving
What he or she cannot have is excuses.
If you have what I want please send me an email. You will end up with a string and a container of Dalton 2000 string conditioner. The string material I want tested is pretty slick and the serving may separate but it promises to be a slightly faster material than I am using now with a lower noise signature.
Last edited by Boo on Wed Mar 02, 2011 8:17 pm, edited 1 time in total.
Some people just like stepping on rakes
Re: I need one string tester.
don too bad i only have a 200 pounder or ya know i would do it ........bob
....
....
exocet 200. STS dampers.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
Re: I need one string tester.
how about a real test , rough latches,no chronograph, poor hearing,poor shooting, bad note takeing,lots of excuses, lots of guessing, lots of experience but not all good.mabey a dry fire or two,lots of wax,used too servings seperating no problem.can shoot lots of arrows with 225lb bow.wore out an excel string in one day before.would love too test one of your strings.
Re: I need one string tester.
ASTRO FLIGHT ????????? If it is I will be ordering a few strings. Ron
VIXEN 2 , PHOENIX
- onebigskittle
- Posts: 2041
- Joined: Tue Sep 21, 2010 1:08 am
- Location: Keysville Virginia
Re: I need one string tester.
no chronograph so im out
Re: I need one string tester.
I can do it ..only thing im concerned about is the 300 shots in 2 weeks..i would need 4.. 30 shots a day 4 10 days would be pretty rigorus.
Micro RTX
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
- Doe Master
- Site Admin
- Posts: 4741
- Joined: Sun Jun 25, 2006 7:57 am
- Location: Baden , Ontario
Re: I need one string tester.
Just think how jacked you would look for your better half .
- Attachments
-
- rippedsquirrel.jpg (47.83 KiB) Viewed 4563 times
Prone est ut nos es plurimus periculosus
Re: I need one string tester.
don you have a pm....also i have a factory dacron, factory FFF, one of your older strings you reserved but yet to use and the one you want tested....so that is 4 strings to compair speed wise with the chrony ....i have what i ya need but the 225# bow.......bob
....
....
exocet 200. STS dampers.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
Re: I need one string tester.
ok don i talked to the archery shop and getting the use of the chrony for as long as i need it is not a problem....just waiting to see if i get any replies to my thread on other forum, so i'm ready to get this done for you when your ready ....i can get the chrony work done while the string gets set in, then do longer range work at my house to get any accruracy readings then.......bob
....
....
exocet 200. STS dampers.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
Re: I need one string tester.
you didnt know? thats how i look under my shirtDoe Master wrote: Just think how jacked you would look for your better half .
the shooting ..i can handle but the time would be tough....job ..family..minstry,,honey do's..= slim on time
Micro RTX
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Re: I need one string tester.
I have my volunteers picked out thank you!
Some people just like stepping on rakes
Re: I need one string tester.
cant wait to hear the results,,
Micro RTX
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Re: I need one string tester.
received a boo string a few days ago to test for him....over all looks are, well it's a boo string what else can one say ....compairing it to another one of his strings, a excalibur factory FF this looks like some slick material he is trying for new string material....i'll be shooting it in a few days with a chrony to compair speeds of it to the other two strings above....don how many shots are ya thinking i'll get before this new string needs reserving, i'll be rotating it every 25 shots or so with one twist of a loop on one side only....my thoughts are instead of a full 180 degree turn of the serving it will only 90 degree....then next turn will be the other side one turn of the loop, do ya think that will work to keep the claws at 4 different spots instead of only two spots on two sides........bob
....
....
exocet 200. STS dampers.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
Re: I need one string tester.
Bob, lets not turn it and make this a torture test. I'm hoping it has to be reserved after 300 shots or more for wear reasons rather than separation reasons.bob1961 wrote:received a boo string a few days ago to test for him....over all looks are, well it's a boo string what else can one say ....compairing it to another one of his strings, a excalibur factory FF this looks like some slick material he is trying for new string material....i'll be shooting it in a few days with a chrony to compair speeds of it to the other two strings above....don how many shots are ya thinking i'll get before this new string needs reserving, i'll be rotating it every 25 shots or so with one twist of a loop on one side only....my thoughts are instead of a full 180 degree turn of the serving it will only 90 degree....then next turn will be the other side one turn of the loop, do ya think that will work to keep the claws at 4 different spots instead of only two spots on two sides........bob
....
Some people just like stepping on rakes
-
- Posts: 6989
- Joined: Thu Oct 19, 2006 12:16 pm
Re: I need one string tester.
Boo . . .I like the way you think!Boo wrote:make this a torture test
Boo also sent me a string for the test. Looking forward to dishing out a little torture! I hope it lasts 300 shots . . .the odds are against it with the Exomax and I'm buffed. I pity this pretty little string!
Sure is a great looking string . . .I'll post my full review when I'm finished. Actually, I might even start a thread so you guys can keep track. . .we'll see.
We should start a pool.
I'd rather wear out than rust out.
Perception trumps intention.
2006 Exomax w/Agingcrossbower Custom Stock
20" Easton Powerbolts w/125gr Trophy Ridge Stricknines & 2"Blazers
Boo Custom Strings
2006 Vixen
Perception trumps intention.
2006 Exomax w/Agingcrossbower Custom Stock
20" Easton Powerbolts w/125gr Trophy Ridge Stricknines & 2"Blazers
Boo Custom Strings
2006 Vixen