Got My Arrow Fletched & Ready To Go
Moderator: Excalibur Marketing Dude
Got My Arrow Fletched & Ready To Go
After tinkering with my bow over with winter, I'd been putting off getting it back out and resighting it in because I was going to start making up my own arrows. I used to "roll my own" back many moons ago when I shot vertical bows, but with all of the advancements, I needed to update all of my stuff. I've been slowly aquiring all of the pieces and parts needed. Got one of the Arizona EZ Fletch jigs for the Blazer vanes back in December, got a dozen GT Lazer II's in January, wraps, vanes, glue, points, grain scale, etc spaced out between February and a couple of weeks ago. Finally had a chance to put everything together yesterday.
Don't know how they shoot yet, but if nothing else, they look cool! Got a little higher FOC than what I wanted though. These are sitting at 19.35% FOC with 125 grain points. I could back it off a little, but I'm planning on shooting 125 grain broadheads this fall, so I think I'll leave it. These I put aluminum inserts into the backs, but the hunting arrows I make will have Luminocks in them. The aluminum inserts weigh 20 grains, a Luminock I had laying around from a Firebolt weighed 30 grains. I think I read somewhere that the ones to fit the GT Lazer II's weigh 27 grains. Either way, that should lower the FOC a little off the 19.35% on the hunting arrows.
Don't know how they shoot yet, but if nothing else, they look cool! Got a little higher FOC than what I wanted though. These are sitting at 19.35% FOC with 125 grain points. I could back it off a little, but I'm planning on shooting 125 grain broadheads this fall, so I think I'll leave it. These I put aluminum inserts into the backs, but the hunting arrows I make will have Luminocks in them. The aluminum inserts weigh 20 grains, a Luminock I had laying around from a Firebolt weighed 30 grains. I think I read somewhere that the ones to fit the GT Lazer II's weigh 27 grains. Either way, that should lower the FOC a little off the 19.35% on the hunting arrows.
The Only Purpose Of Bread Is To Hold Meat!
Common Sense Isn't Common Any More..........
"Salad isn't food. Salad is what food eats." --- Ellwoodjake
I'm a second-hand vegetarian. Deer eat vegetables, I eat deer.
Common Sense Isn't Common Any More..........
"Salad isn't food. Salad is what food eats." --- Ellwoodjake
I'm a second-hand vegetarian. Deer eat vegetables, I eat deer.
- Limbs and Sticks
- Posts: 3206
- Joined: Mon Sep 01, 2008 7:13 pm
- Location: Colonial Beach, Virginia, US
Re: Got My Arrow Fletched & Ready To Go
I see Mindy hooked you up right with those wraps, if they came from one string, looking good
Wes
Wes
"Maxine"
1.75x5 Burris scope
Boo string
STS
Feathered easton 2020's
Magnus stingers
1.75x5 Burris scope
Boo string
STS
Feathered easton 2020's
Magnus stingers
Re: Got My Arrow Fletched & Ready To Go
the arrows look awesome! wish i had the patience and talent to do my own. ........love the wraps!!Big58cal wrote:After tinkering with my bow over with winter, I'd been putting off getting it back out and resighting it in because I was going to start making up my own arrows. I used to "roll my own" back many moons ago when I shot vertical bows, but with all of the advancements, I needed to update all of my stuff. I've been slowly aquiring all of the pieces and parts needed. Got one of the Arizona EZ Fletch jigs for the Blazer vanes back in December, got a dozen GT Lazer II's in January, wraps, vanes, glue, points, grain scale, etc spaced out between February and a couple of weeks ago. Finally had a chance to put everything together yesterday.
Don't know how they shoot yet, but if nothing else, they look cool! Got a little higher FOC than what I wanted though. These are sitting at 19.35% FOC with 125 grain points. I could back it off a little, but I'm planning on shooting 125 grain broadheads this fall, so I think I'll leave it. These I put aluminum inserts into the backs, but the hunting arrows I make will have Luminocks in them. The aluminum inserts weigh 20 grains, a Luminock I had laying around from a Firebolt weighed 30 grains. I think I read somewhere that the ones to fit the GT Lazer II's weigh 27 grains. Either way, that should lower the FOC a little off the 19.35% on the hunting arrows.
IN GOD WE TRUST
Jeff
animals are killed, crops are harvested
matrix 355
matrix 330
BE executioners and zombies, w/110 brass
100gr spitfire maxx
Boo strings
excaliber strings
Dagriz knife
Jeff
animals are killed, crops are harvested
matrix 355
matrix 330
BE executioners and zombies, w/110 brass
100gr spitfire maxx
Boo strings
excaliber strings
Dagriz knife
Re: Got My Arrow Fletched & Ready To Go
Real nice job you did on those arrows. I love the just passin thru wraps!! Very nice.
Gun control is like trying to reduce drunk driving by making it tougher for sober people to own cars.
Vortex
Trigger Tech 2.5 Trigger
ShadowZone Scope
S5 with dB Killer Bumpers
Boo String
Big John Zombie Slayers
Rage Broadheads
Vortex
Trigger Tech 2.5 Trigger
ShadowZone Scope
S5 with dB Killer Bumpers
Boo String
Big John Zombie Slayers
Rage Broadheads
Re: Got My Arrow Fletched & Ready To Go
Yep. I had been drooling over some of their designs for a while wanting to order them, but didn't see the need in it until I got closer to getting ready to assemble. Took a while to finally narrow things down as to the design.Limbs and Sticks wrote:I see Mindy hooked you up right with those wraps, if they came from one string, looking good
Wes
Actually, it's not hard and doesn't require a lot a talent. Heck, if I can do it, anyone can! The hardest part was putting the wraps on, but that wasn't really hard. Peel the wrap, lay it on a flat surface, position the arrow next to the wrap with the ends as flush as you can get it (eye-balling it), get your shaft aligned with the edge of the wrap, and then roll. I rolled it about a 1/4 turn and then slowly worked it the rest of the way on with my fingers to keep out any air bubbles and such.Deaf jeff wrote:wish i had the patience and talent to do my own. ........love the wraps!!
Thanks for the compliments folks! I'm rather proud of my first attempt at it with the wraps, Blazers, and EZ Fletch jig. The wife didn't seem to share my enthusiasm though.
It's supposed to storm this afternoon, so it's looking like tomorrow before I'll get to see how they shoot.
The Only Purpose Of Bread Is To Hold Meat!
Common Sense Isn't Common Any More..........
"Salad isn't food. Salad is what food eats." --- Ellwoodjake
I'm a second-hand vegetarian. Deer eat vegetables, I eat deer.
Common Sense Isn't Common Any More..........
"Salad isn't food. Salad is what food eats." --- Ellwoodjake
I'm a second-hand vegetarian. Deer eat vegetables, I eat deer.
Re: Got My Arrow Fletched & Ready To Go
Hey Mark,
Them there are just beautiful. The only thing that would make them prettier would if I was shooting them there arrowsa, . They look great. You done a great job on them. Congratulations now we want to see some blood on them, . Thanks for showing us they are nice arrows.
Thanks,
Raymond
Them there are just beautiful. The only thing that would make them prettier would if I was shooting them there arrowsa, . They look great. You done a great job on them. Congratulations now we want to see some blood on them, . Thanks for showing us they are nice arrows.
Thanks,
Raymond
- nchunterkw
- Posts: 2904
- Joined: Sat Dec 24, 2011 11:21 am
- Location: Wake Forest, NC
- Contact:
Re: Got My Arrow Fletched & Ready To Go
Just curious...why the wraps? They look cool, but when I shoot quickspin/quickfletchs (the ones with the shrink wrap) out of my Vortex I get a little bit of that "wrap" left on the rail.
Keith
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Re: Got My Arrow Fletched & Ready To Go
Greater visibility...... and they look cool.nchunterkw wrote:Just curious...why the wraps? They look cool, but when I shoot quickspin/quickfletchs (the ones with the shrink wrap) out of my Vortex I get a little bit of that "wrap" left on the rail.
The Only Purpose Of Bread Is To Hold Meat!
Common Sense Isn't Common Any More..........
"Salad isn't food. Salad is what food eats." --- Ellwoodjake
I'm a second-hand vegetarian. Deer eat vegetables, I eat deer.
Common Sense Isn't Common Any More..........
"Salad isn't food. Salad is what food eats." --- Ellwoodjake
I'm a second-hand vegetarian. Deer eat vegetables, I eat deer.
Re: Got My Arrow Fletched & Ready To Go
Well done buddy.Big58cal wrote:After tinkering with my bow over with winter, I'd been putting off getting it back out and resighting it in because I was going to start making up my own arrows. I used to "roll my own" back many moons ago when I shot vertical bows, but with all of the advancements, I needed to update all of my stuff. I've been slowly aquiring all of the pieces and parts needed. Got one of the Arizona EZ Fletch jigs for the Blazer vanes back in December, got a dozen GT Lazer II's in January, wraps, vanes, glue, points, grain scale, etc spaced out between February and a couple of weeks ago. Finally had a chance to put everything together yesterday.
Don't know how they shoot yet, but if nothing else, they look cool! Got a little higher FOC than what I wanted though. These are sitting at 19.35% FOC with 125 grain points. I could back it off a little, but I'm planning on shooting 125 grain broadheads this fall, so I think I'll leave it. These I put aluminum inserts into the backs, but the hunting arrows I make will have Luminocks in them. The aluminum inserts weigh 20 grains, a Luminock I had laying around from a Firebolt weighed 30 grains. I think I read somewhere that the ones to fit the GT Lazer II's weigh 27 grains. Either way, that should lower the FOC a little off the 19.35% on the hunting arrows.
TFS
"Death leaves a heartache no one can heal. Love leaves a memory no one can steal"
-
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
Re: Got My Arrow Fletched & Ready To Go
Very nice really eye catching, do it to it my friend!
Re: Got My Arrow Fletched & Ready To Go
Thanks folks! Still haven't had a chance to shoot the things yet. I'm hoping this weekend.
The Only Purpose Of Bread Is To Hold Meat!
Common Sense Isn't Common Any More..........
"Salad isn't food. Salad is what food eats." --- Ellwoodjake
I'm a second-hand vegetarian. Deer eat vegetables, I eat deer.
Common Sense Isn't Common Any More..........
"Salad isn't food. Salad is what food eats." --- Ellwoodjake
I'm a second-hand vegetarian. Deer eat vegetables, I eat deer.
-
- Posts: 32
- Joined: Fri Nov 04, 2011 9:12 pm
Re: Got My Arrow Fletched & Ready To Go
Nothing wrong with that FOC. Read Dr. Ed. Ashby's
2008 Study update, Part 6 for some interesting
facts and observations. For example: "Earlier testing...has shown that from 19% FOC upwards
there is a measurable gain in arrow penetration."
MJS
2008 Study update, Part 6 for some interesting
facts and observations. For example: "Earlier testing...has shown that from 19% FOC upwards
there is a measurable gain in arrow penetration."
MJS
Re: Got My Arrow Fletched & Ready To Go
Nice arrows! I agree w/ the above post on higher FOC.......
"Eze 18:21"
Re: Got My Arrow Fletched & Ready To Go
I was shooting for around a 15% or so FOC. The 19% to me just seems a little high. This fall I'm going to fletch up another dozen for hunting and will use the same components, with the exception of adding Luminocks in the back. That will add an addition 7-10 grains to the back. That will bring it down a bit from the 19.35% but probably not much.
Still haven't gotten to shoot the things yet! Got out of work early yesterday, but had to start getting the garden in the ground. Worked on that until dark. Got up this morning and started on the garden again until my boss came out to the house. He brought his daughter out her to the house for me to teach her how to shoot some "real" guns. She's in JROTC in high school, but they only let them shoot pellet guns and was interested in shooting something with a little more power.
4 hours later, I got done with them and started back in on the garden. Finished up on the garden just as it started raining. Hopefully sometime this week I'll get to see how well these beasts fly!
Still haven't gotten to shoot the things yet! Got out of work early yesterday, but had to start getting the garden in the ground. Worked on that until dark. Got up this morning and started on the garden again until my boss came out to the house. He brought his daughter out her to the house for me to teach her how to shoot some "real" guns. She's in JROTC in high school, but they only let them shoot pellet guns and was interested in shooting something with a little more power.
4 hours later, I got done with them and started back in on the garden. Finished up on the garden just as it started raining. Hopefully sometime this week I'll get to see how well these beasts fly!
The Only Purpose Of Bread Is To Hold Meat!
Common Sense Isn't Common Any More..........
"Salad isn't food. Salad is what food eats." --- Ellwoodjake
I'm a second-hand vegetarian. Deer eat vegetables, I eat deer.
Common Sense Isn't Common Any More..........
"Salad isn't food. Salad is what food eats." --- Ellwoodjake
I'm a second-hand vegetarian. Deer eat vegetables, I eat deer.
Re: Got My Arrow Fletched & Ready To Go
You'll barely be able to tell the diff in 15% and 19% FOC. What will show up is in your bheads.
I was a fan of higher FOC's until I shot a Boo arrow while he was here. It was fletched w/ newer AZ-EZ 'Bolt' setup. My Slick hit 1" high at 30 yds. It had 2" blazers.
I don't know what arrow it was, but it hadn't a brass insert.
I was a fan of higher FOC's until I shot a Boo arrow while he was here. It was fletched w/ newer AZ-EZ 'Bolt' setup. My Slick hit 1" high at 30 yds. It had 2" blazers.
I don't know what arrow it was, but it hadn't a brass insert.
"Eze 18:21"