Scope Rings - Micro and Nikon Bolt

Eck · Post by **Eck** » Sun Sep 13, 2015 8:44 pm

I've given into temptation and ordered a Micro, due in later in the week. Based on my experience with the Varizone and rings on my Emag, and experience/comments from others on the forum, I'm looking hard at upgrading those items from the "kit". I've 90% settled on a Nikon Bolt for optics, but wanted to ask what rings folks are using/recommending. I'd like to go with "Low" rings if they fit with that scope . . . what are folks using?

Thanks in advance!

xcaliber · Post by **xcaliber** » Sun Sep 13, 2015 8:47 pm

Medium Leupold Rifleman rings, low won't get you there! I found them on Ebay for $14.99 shipped free.

foofoo · Post by **foofoo** » Sun Sep 13, 2015 9:03 pm

i try to use these on everything http://www.midwayusa.com/product/136212 ... ings-matte

Deerstalker · Post by **Deerstalker** » Sun Sep 13, 2015 9:16 pm

I used the Weaver medium tactical rings. The Nikon Bolt is short and the low rings would not work as the scope objective lens would hit the scope rail even with the center groove in the rail.

CT.HNTR · Post by **CT.HNTR** » Sun Sep 13, 2015 9:21 pm

I have the Nikon Bolt on my Matrix 355 and Exocet 200. For both I used low Leupold PRW rings in black matte. The work great and fit perfect. High quality rings.

Eck · Post by **Eck** » Sun Sep 13, 2015 9:39 pm

Thanks All!

GrassyKnoll · Post by **GrassyKnoll** » Sun Sep 13, 2015 9:42 pm

Congrats on your new Micro

bubba · Post by **bubba** » Mon Sep 14, 2015 11:21 am

Yep.. You will need med rings. That Nikon bolt i'm sure will be a great addition..

longbow joe · Post by **longbow joe** » Mon Sep 14, 2015 9:08 pm

I have a bolt on my 330 the velocity on a bolt is for 305 fps my arrows 400 grain drag the velocity down to around that at real hunting distances 40 yards your gonna be pretty much dead on the points . I have weaver 6 bolt medium rings. I have a crossbones on my micro there both great scopes. Medium rings are needed for the bolt on a micro. Too

canoe13 · Post by **canoe13** » Mon Sep 14, 2015 9:33 pm

I use low steel Millett rings and filed down the scope base so the scope fits as it should.

shafferm · Post by **shafferm** » Mon Sep 14, 2015 10:24 pm

I would highly recommend the Burris Signature Series Zee Rings. They work great and do not scratch your scope, a little expensive but very worth for keeping your scope rigidly mounted.

longbow joe · Post by **longbow joe** » Mon Sep 14, 2015 10:32 pm

Dont forget every mfr. Of rings low med high varies a little on height

vpsaline · Post by **vpsaline** » Mon Sep 14, 2015 10:38 pm

Millett DT00702 14$ great bang for your buck! The low won't fit, I tried.

Excalibur Crossbow Forum

Scope Rings - Micro and Nikon Bolt

Scope Rings - Micro and Nikon Bolt

Re: Scope Rings - Micro and Nikon Bolt

Re: Scope Rings - Micro and Nikon Bolt

Re: Scope Rings - Micro and Nikon Bolt

Re: Scope Rings - Micro and Nikon Bolt

Re: Scope Rings - Micro and Nikon Bolt

Re: Scope Rings - Micro and Nikon Bolt

Re: Scope Rings - Micro and Nikon Bolt

Re: Scope Rings - Micro and Nikon Bolt

Re: Scope Rings - Micro and Nikon Bolt

Re: Scope Rings - Micro and Nikon Bolt

Re: Scope Rings - Micro and Nikon Bolt

Re: Scope Rings - Micro and Nikon Bolt