good morning all
I am new to the x bow world , have owned 2 verticals , I have a couple of questions hoping you can help me with . I am a 2 fingered typist 1 is called hunter the other is poker they are 62 years young , please bear with lol . out of the box ,limb assemble , the string is stretched to the point of putting heavy pressure on the reds . I have the 380 assembled , the kit was missing the limb mount allan key and the quiver bracket screws. this is no problem . question 1 the rope caulking aid seems very short when hooked into the loading grove and 1 side of the string against the rail the other side is 3.5 to 4 " above the string has this been cut back? and should I replace the bow string
new matrix 380 bo
Moderator: Excalibur Marketing Dude
new matrix 380 bo
matrix 380 BO
TC 54 renegade PC
marlin 3030 336 RC G
TC 54 renegade PC
marlin 3030 336 RC G
- otisbrazwell
- Posts: 487
- Joined: Mon Jan 06, 2014 3:55 pm
- Location: rhode island
- Contact:
Re: new matrix 380 bo
you need a string aid and the string needs to have more twists in it..string should be 1/4"-3/8" off rubber bumpers..
Last edited by otisbrazwell on Sun Jan 31, 2016 8:32 pm, edited 1 time in total.
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: new matrix 380 bo
The rope is supposed to be short . You need to lift the string to the hook and pull . On this web site I think there is a section on using the cocking rope . Did you get an manual with it ? That should be in there .
Re: new matrix 380 bo
Stringing aid ASAP! You can pretty much do all your own maintance on an excal yourself. You made a great purchase.
Brad
Brad
Mad max 380
Stock string
Dr stirrup kit
Zombie slayers
Rage Hypodermic 100 gr
Leupold Crossbones
Stock string
Dr stirrup kit
Zombie slayers
Rage Hypodermic 100 gr
Leupold Crossbones
Re: new matrix 380 bo
thx bcwn
i.ve only wanted an excal for about 10 years ive done a lot of research and watched a ton of vids about our sport and the trainings vids by Excalibur
i.ve only wanted an excal for about 10 years ive done a lot of research and watched a ton of vids about our sport and the trainings vids by Excalibur
matrix 380 BO
TC 54 renegade PC
marlin 3030 336 RC G
TC 54 renegade PC
marlin 3030 336 RC G
-
- Posts: 4970
- Joined: Sun Nov 24, 2013 11:32 pm
- Location: Coquitlam, British Columbia
Re: new matrix 380 bo
Welcome to the forum.
As stated, the cocking aid is supposed to be that length. It's easier to load with less length of pull by pulling the string up to the hook.
***DO NOT SHOOT YOUR BOW WITH THE STRING ON THE BUMPERS!***
This can damage your limbs. You need a stringing aid. This will allow you to half cock your bow and remove one end of the string to add twists to it/shorten it.
You can buy the Excalibur stringing aid or you can purchase it from Boo on this forum or Danny Miller at horizontal archery. I prefer the latter.
Paul
As stated, the cocking aid is supposed to be that length. It's easier to load with less length of pull by pulling the string up to the hook.
***DO NOT SHOOT YOUR BOW WITH THE STRING ON THE BUMPERS!***
This can damage your limbs. You need a stringing aid. This will allow you to half cock your bow and remove one end of the string to add twists to it/shorten it.
You can buy the Excalibur stringing aid or you can purchase it from Boo on this forum or Danny Miller at horizontal archery. I prefer the latter.
Paul
You're only paranoid if everyone isn't out to get you.
Keep your friends close and your enemies closer.
My enemy's friend is also my enemy.
Keep your friends close and your enemies closer.
My enemy's friend is also my enemy.
Re: new matrix 380 bo
good afternoon all
got to town and found an excal string aid at Canadian tire . by the time I got that dern thing adjusted so I could get the string off I was worn out lol the string came off stiff as a plank almost petrified . I hand waxed it with x wax and touched up all the servings cranked about 20 twists into it and now it just touches the reds pads . i'm about 3/4 " low of my brace height mark still. and im not sure how many more twists can safely be put into the string . or should I buy a new 1. this 1 has probably bin loaded up on the limbs since new so about 2-3 years thanx again for all the help
got to town and found an excal string aid at Canadian tire . by the time I got that dern thing adjusted so I could get the string off I was worn out lol the string came off stiff as a plank almost petrified . I hand waxed it with x wax and touched up all the servings cranked about 20 twists into it and now it just touches the reds pads . i'm about 3/4 " low of my brace height mark still. and im not sure how many more twists can safely be put into the string . or should I buy a new 1. this 1 has probably bin loaded up on the limbs since new so about 2-3 years thanx again for all the help
matrix 380 BO
TC 54 renegade PC
marlin 3030 336 RC G
TC 54 renegade PC
marlin 3030 336 RC G
-
- Posts: 2978
- Joined: Mon Jul 12, 2010 10:21 pm
- Location: Thompson/Nicola, British Colombia
Re: new matrix 380 bo
Welcome codye! Don't worry about the amount of twists your string can take. Just crank that string till you get the brace height. Dont load the string up with wax or you will have wax sprayed all over your bow or in your trigger box which would gum it up. Use it sparingly or spray some teflon sprayed on a rag and wiped on and off the top of your rail. Happy shootin,codye wrote:good afternoon all
got to town and found an excal string aid at Canadian tire . by the time I got that dern thing adjusted so I could get the string off I was worn out lol the string came off stiff as a plank almost petrified . I hand waxed it with x wax and touched up all the servings cranked about 20 twists into it and now it just touches the reds pads . i'm about 3/4 " low of my brace height mark still. and im not sure how many more twists can safely be put into the string . or should I buy a new 1. this 1 has probably bin loaded up on the limbs since new so about 2-3 years thanx again for all the help
Hank
Re: new matrix 380 bo
gm to all
thank you Hank for the info and again to the forum for the assistance with my new canon , this is going to as much fun as my tc 54 cal renegade pc . time to get ready for work . have a great day gang and be safe
thank you Hank for the info and again to the forum for the assistance with my new canon , this is going to as much fun as my tc 54 cal renegade pc . time to get ready for work . have a great day gang and be safe
matrix 380 BO
TC 54 renegade PC
marlin 3030 336 RC G
TC 54 renegade PC
marlin 3030 336 RC G
Re: new matrix 380 bo
Welcome to the forum and have fun with that new Excal!
Gun control is like trying to reduce drunk driving by making it tougher for sober people to own cars.
Vortex
Trigger Tech 2.5 Trigger
ShadowZone Scope
S5 with dB Killer Bumpers
Boo String
Big John Zombie Slayers
Rage Broadheads
Vortex
Trigger Tech 2.5 Trigger
ShadowZone Scope
S5 with dB Killer Bumpers
Boo String
Big John Zombie Slayers
Rage Broadheads